# 3D printed pet ID tags: bone, round and silent collar tags, plus a sign for the bed

> Three pet ID tags that carry the owner's phone number, a QR tag that hides it, and the name pieces for the bed, the crate and the treat jar. What each is for, what to print them in, and how to sell them honestly.

Web page: https://stlmint.app/blog/3d-printed-pet-id-tags

By Neha Parsiya (https://stlmint.app/authors/neha-parsiya). Published 2026-10-23, updated 2026-11-18

A new puppy or a rescue cat comes home, and the owner wants its name on everything: the collar, the bed, the treat jar. The collar is the piece that matters most, because a tag with a phone number is how a lost pet gets home.

A tag works alongside a microchip, not instead of one. In the UK, dogs and cats [must be microchipped and registered on a database](https://www.gov.uk/get-your-dog-cat-microchipped), but a finder needs a vet or scanner to read a chip. A tag can be read on the spot. What goes on it varies: the UK's Control of Dogs Order 1992 says a dog in a public place must wear the [owner's name and address, including postcode](https://www.dorsetdogs.org.uk/dog-law/), on the collar or a tag attached to it. A phone number isn't required, but it is the quickest way for a finder to reach you.

A printed tag can do that job if you sell it straight. Here are the tags, the pieces that go round the house, and what to tell customers about each.

## Three tags with a phone number

All three carry the pet's name and the owner's phone number, raised in a second colour. The name can be bold or a joined script; the number always stays in a plain face, so a finder reads it at a glance.

- **The [bone pet ID tag](/designs/bone-pet-id-tag)** is the classic dog tag: 60 mm long, with the ring hole in one end and a raised rim round the hole where the ring pulls. A paw, a bone, a cat or another icon sits beside the name. Good for medium and large dogs.
- **The [round pet ID tag](/designs/round-pet-id-tag)** is 38 mm across. The name runs across the middle, a short line such as IF FOUND CALL arches over the top, and the number follows the rim round the bottom. It hangs from a ring tab outside the disc, so the lettering keeps the whole circle. A script name and a cat icon suit a cat collar.
- **The [collar slide tag](/designs/collar-slide-pet-id-tag)** has no ring at all. The collar threads through two slots, so the tag lies flat on the collar: no jingle against the bowl at night, nothing to catch on a fence. Enter the collar width (10 to 32 mm) and the slots are cut to fit. Ask customers to measure the collar's width, not its length.

## A tag that keeps the number private

Some owners don't want their phone number on show. The [scan-if-found tag](/designs/scan-if-found-bag-tag) carries a big QR code instead, which opens a WhatsApp chat, a contact page or an email when a finder scans it. It is a bag tag at heart, too big for a cat collar, but it suits a pet carrier, a travel crate, the walk bag or a large dog's harness. An optional line engraved on the back gives a finder whose camera won't focus something to go on.

Print the code dark on a light tag and scan the first one before you sell a batch.

## Be honest about what plastic can do

A tag has a serious job, so say plainly what a printed one is and isn't:

- **Print tags in PETG.** Prusa's material guide says PLA [gets soft and deforms above 60 °C](https://help.prusa3d.com/article/pla_2062) and breaks on impact, while PETG is tougher and [holds up below 80 °C](https://help.prusa3d.com/article/petg_2059), which matters in a parked car in summer. The collar slide tag is 3 mm thick by default, because it flexes with the collar.
- **Plastic wears faster than metal.** Tell customers to check the tag every few weeks and replace it when the lettering wears down.
- **Chewers and working dogs need metal.** For a dog that chews its tag or spends its days outdoors, recommend a metal tag.
- **Check local rules.** Some places ask for more than a name and number. In the UK, as above, the law asks for the owner's name and address. Put the extra words on the round tag's top line, or on a second tag.
- **Test it.** Print a sample, fit the split ring you'll ship, and drop it on a hard floor, so you can tell customers how it holds up.

## Pieces for round the house

These carry the name but no contact details, and they don't go on the pet:

- **The [paw print charm](/designs/paw-print-pet-charm)** is a decorative charm for a lead, a keyring or a gift box, with a line underneath like GOOD GIRL or the adoption date. Sell it alongside a real tag, never instead of one. Our post on [pet name charms](/blog/personalised-pet-name-charms) covers how to word that.
- **The [pet bed and crate sign](/designs/pet-bed-name-sign)** goes on a crate door, kennel or hutch: the name big, a paw print, and a line such as SLEEPS HERE or OFF DUTY. It screws on through two holes, or hangs on the swap wall mount.
- **The [treat jar label](/designs/pet-treat-jar-label)** puts a bone and the name on the treat jar, food tub or toy box. It sticks on with foam tape. Keep it on the outside of the container: printed plastic isn't food-safe.

## How to sell them

- **Sell a new-pet set.** A tag, a bed sign and a treat jar label in the same colours is an easy gift for a new owner, and a bigger order than a tag on its own.
- **Pair the tags.** The collar slide tag for every day and the bone for walks, in matching colours.
- **Go to breeders and rescues.** They send animals home in batches. Take the litter's names and one phone number, paste the list into a bulk order, and every puppy goes home with a tag and a crate sign.
- **Put the care note in the box.** A small card that says "check this tag every few weeks; replace it when the letters wear" protects you and the pet.
- **Show colour first.** Colour is the main choice a buyer makes on these, so photograph one tag in three or four colour pairs.

See all the [pet accessories](/designs/pet-accessories), and our guide to [pricing personalised prints](/blog/how-to-price-personalised-3d-prints) for quoting a set.
