# Café table number stands, signs and tools to 3D print and sell

> Table number stands, order numbers, reserved signs, a custom coffee stencil and a bag stamp: how to sell a café one matched set in its own colours, from the first visit to the refill order.

Web page: https://stlmint.app/blog/3d-printed-signs-and-tools-for-cafes

By Neha Parsiya (https://stlmint.app/authors/neha-parsiya). Published 2026-10-15, updated 2026-11-18

## What a café actually uses

A small café runs on a lot of small objects: a number that goes to the table with the order, a reserved sign, something that holds the menu or the QR card, labels on the buffet, and a cocoa stencil for the cappuccinos. Most come in sets, most carry the café's name, and they go missing or get damaged in daily use, so they need replacing.

A few facts shape what you make:

- **Cups set the stencil size.** A standard cappuccino is about [150 to 180 ml in a small cup with a handle](https://en.wikipedia.org/wiki/Cappuccino), so a stencil only needs to cover a small round of foam. Chain-size cups are larger.
- **QR codes do two jobs.** One opens a menu or review page; the other can [join a guest to the Wi-Fi](https://github.com/zxing/zxing/wiki/Barcode-Contents) when it holds the network name and password in the `WIFI:` format that Android and iOS 11+ cameras read.
- **Anything that goes into food is a different job.** Printed layers leave grooves that are [hard to clean and can hold bacteria](https://help.prusa3d.com/article/food-safe-fdm-printing_112313), and pigments and additives vary by brand. Signs, stands and stencils that sit near food are fine in ordinary PLA; picks that go into food need more care (see below).

Because the pieces work as a set, it helps to sell them as one: same two filaments, same name, same lettering, from the counter to the table to the takeaway bag.

## Café signs and table stands, by where they sit

Sort the range by where each piece lives. Owners think about their café that way, and it keeps the list short.

### On the counter

- **[Order number tents](/designs/order-number-tent).** Handed over with the order, so the runner finds the table. Two 72 mm plates lean together under a ridge cap, so the number reads from both sides, with the café's name under it.
- **[Pickup tokens](/designs/pickup-token).** For canteens, sweet shops and food courts. A 40 mm coin, square or ticket with a big number and the name, about a dozen to a plate.
- **[Review stand](/designs/review-stand).** A review QR code by the till, with an optional pocket for an NFC sticker (see [NFC business cards](/blog/3d-printed-nfc-business-cards)).
- **[Wi-Fi sign](/designs/wifi-sign).** Scan the code and the phone joins the network, no typing.

### On the table: table number stands and restaurant signs

- **[Table number tents](/designs/table-number-tent).** A big number with a QR code on both sides, for places with a QR menu or ordering page.
- **[Order number flags](/designs/order-number-flag).** A number on a stem about 150 mm tall that shows over plates and glasses, with a disc, square or cloche head.
- **[Reserved blocks](/designs/reserved-table-block).** One solid 140 by 50 mm block that stands by itself and leans back to face the door, with the café's name above RESERVED.
- **[Napkin holder](/designs/napkin-holder).** The café's name on both plates, 140 mm long with a 40 mm gap; measure their napkins and adjust.
- **[Menu card holder](/designs/menu-card-holder).** Holds their own menu or acrylic QR card, from 100 mm to A4, with their name on the front rail.
- **[Table signal](/designs/table-signal).** A three-sided tower: ready to order, bill please, all good. Guests turn the side they need to the room.

### In the kitchen and on the buffet

- **[Order picks](/designs/order-pick).** A flag on a spike for the special plate: NO ONION, JAIN, VEGAN, or a table number.
- **[Sauce bottle tags](/designs/sauce-bottle-tag).** A collar for squeeze bottles: MINT CHUTNEY, TAMARIND, SCHEZWAN.
- **[Buffet dish labels](/designs/buffet-dish-label).** The dish name, the veg or non-veg mark, a line for ingredients or price, and zero to three chillies.
- **[Allergen markers](/designs/allergen-marker).** CONTAINS NUTS, GLUTEN FREE and the rest, on a foot or a spike.

### On the cup and the bag

- **[Coffee stencil](/designs/coffee-stencil).** The café's name round the edge and a heart, bean, leaf, star or initial in the middle.
- **[Bag stamp](/designs/bag-stamp).** The name in raised, mirrored letters, for kraft bags and boxes with an ordinary ink pad.

You can see all of these together on the [cafés and restaurants page](/designs/restaurants), and the [cafés and restaurants ideas page](/ideas/cafes-and-restaurants) has example settings for each.

## The custom coffee stencil is the door opener

If you bring one thing to a first visit, make it a custom coffee stencil with their name. It is one colour, 1 mm thick and prints in a few minutes, so the sample costs almost nothing. Hold it over a cappuccino, dust cocoa, and the name lands on the foam: the thing customers photograph.

The design area is 72 mm across, sized for the foam in a regular cappuccino cup, inside a solid 12 mm ring so the cocoa only lands where it should. Closed letters like O, A and B get a thin bridge so their middles stay on the stencil. Print it in PLA or PETG; it sits over the cup and never touches the drink. Thin stencils bend and get lost, so offer a set of three.

## Selling the matched set in one visit

Many small cafés have a logo, two colours and a name over the door, and not much else in the way of brand material. Your pitch: everything they hand out or put on a table can carry that name.

Before you go:

- **Pick the two filaments.** Almost every piece here prints in a base colour and a lettering colour; the coffee stencil and bag stamp are one colour. Match the café's sign or cups as closely as you can. A dark base with white or cream lettering reads best across a room.
- **Print two samples.** An order number tent or reserved block with their name, plus the coffee stencil. Something that stands on the table does the selling.
- **Have renders of the rest** with their name on, enough to take the order.

At the counter, walk through the list by place: counter, table, kitchen, bag. An owner may start with three or four things. A café that has not opened yet needs everything at once, so that is a good time to call.

## How many to quote for

Rough set sizes that work as a starting point:

- **Order numbers or pickup tokens:** 1 to 20 for a small café, 1 to 50 for a busy one, plus a few spares.
- **Reserved blocks:** four to ten.
- **Napkin holders, menu holders, table signals:** one per table.
- **Table number tents:** one per table, each with its own number.
- **Order picks and sauce tags:** one for each word or sauce the kitchen uses, often two or three of each.
- **Buffet labels:** one per dish on the regular menu; caterers reuse them.
- **Coffee stencils:** three. **Bag stamp:** one, sold with an ink pad as a kit.
- **Wi-Fi sign and review stand:** one each.

Quote the set as one price with per-piece figures underneath. [How to price personalised 3D prints](/blog/how-to-price-personalised-3d-prints) covers the maths, including bulk discounts.

## Making the files without retyping

Numbered sets are where retyping goes wrong. On the Seller plan, open the design, choose **Bulk order** and paste one number per line, 1 to 30 for example. You get a ZIP with one print-ready file per number. The same works for dish names on buffet labels, words on order picks and sauces on bottle tags. Set the veg mark and chillies on each dish label before you print.

Keep each café's settings and list, so a refill takes minutes.

## How the pieces print

Everything prints flat with no supports. Tents, flags, the napkin holder, table signal and menu holder print as flat plates and a base that slot together. Most are two colours with a single filament change, so a printer without an AMS handles them with a pause. The buffet label's third colour for the veg mark needs an AMS; without one, print the mark in the lettering colour. [Two-colour name prints in Bambu Studio](/blog/two-colour-name-prints-in-bambu-studio) walks through the change.

A few points to check:

- **Order flags** stand tall, so print the foot with 40% infill or more to make it heavy.
- **Bag stamps** want a fine layer height, 0.12 to 0.16 mm, for crisp letters.
- **Sauce tags** are thin on purpose, so the tabs round the hole bend over the neck. Tell the kitchen to take them off for the dishwasher. [PLA gets soft and deforms above about 60 °C](https://help.prusa3d.com/article/pla_2062); PETG has better temperature resistance, so it copes better with warm washing.
- **Order picks and spiked allergen markers** go into food. Print those in a filament the maker states is food safe, wash them before use, and replace scratched ones: Prusa's [guide to food-safe printing](https://help.prusa3d.com/article/food-safe-fdm-printing_112313) explains why layer lines and nozzle material matter.
- **QR codes:** scan the first print before you print the rest.

## Lead times

For a typical café set, allow:

- a day to agree the list and send one approval picture with their name and colours,
- a day or two to print twenty order numbers,
- another day or two for the table pieces, depending on the number of tables.

A week from first visit to delivery is realistic and leaves room for a reprint. Batch by colour, as in [batch printing custom orders](/blog/batch-printing-custom-orders).

## Keep the café coming back

Pack the set by place, counter pieces in one bag and table pieces in another, with the spares labelled, and note the date. Order numbers go missing, a seasonal stencil is worth offering before Diwali or Christmas, and a second branch needs the whole set again.
