Baby first year photo board to 3D print: a photo magnet a month until the first birthday
A 12 month photo frame for the wall or the fridge: twelve pockets, one photo magnet a month, a numbered tag under each and the baby's name across the top. Which photo magnet size to order, how big the board is, how it hangs and how it ends up at the first birthday party.
The first year goes fast, and the monthly photos mostly stay on a phone. A baby first year photo frame gets them off it: one picture a month, in order, somewhere the family walks past every day. By the first birthday the whole year is there on one board.
Many 12 month photo frames are made to be filled all at once, at the end. A board that fills up as you go suits the monthly habit better: each month a new photo goes in, and the board grows with the baby.
What to know first
- Pick the photo size before anything else. Square photo magnets come in sizes such as 2 inches (about 51 mm) and 1.5 inches (38 mm). Whatever holds them has to be sized to the magnets you can actually buy.
- Small magnets need care in a home with a baby. The UK's Office for Product Safety and Standards issued a safety alert on small, high-powered magnets because swallowing two or more can cause serious injury, and it names fridge magnets among the products involved. Its Small hazards, big harm campaign asks parents to keep magnets and button batteries out of children's reach. Glue magnets in firmly, and hang the board where a crawling or climbing child can't reach it.
- Hang it where people walk past. A hallway, the kitchen or the fridge door gets seen every day; a nursery wall is seen mostly by the baby.
What the board is
The first year photo board is a flat board with twelve square pockets in a grid. Under each pocket is a small tag with its number, and across the top is the baby's name in script with a smaller line under it. Out of the box it reads Liam's First Year, 2026 - 2027, with tags 1 to 12.
Each pocket has a small round magnet glued into its floor. The photo magnets themselves are ordered or printed separately; when one goes in, it clicks onto the magnet below and the pocket keeps it straight. A little dip in the rim above each pocket gives a fingertip somewhere to lift a photo out, so a better shot from the same month can go in instead.
It is a print file, not a finished board. You set the words and sizes in the browser, download the file and print it yourself.
Tag ideas
The tags are one box, with commas between them. Up to twelve, and the number of tags sets the number of pockets, so the board can be smaller than a full year.
- Numbers. 1 to 12 is the default and the classic monthly baby photo display.
- Months. MONTH 1 to MONTH 12 if you like it spelled out, or JAN to DEC for a family's year in photos rather than a baby's. The Johnsons might put OUR YEAR 2027 under their name for that one.
- Weeks. WEEK 1 to WEEK 8 for the newborn weeks, when the baby changes from one Sunday to the next. Emma's First Weeks across the top suits it.
- Your own words. NEWBORN, FIRST SMILE, FIRST BATH, or the names of the grandchildren on a grandparents' board.
Short words come out bigger, since each tag is fitted to its pocket. The words are cut out of the tag, so they show in the board's colour against the second colour.
Which photo magnet size to order
The board takes square photo magnets of 1.5 inches, 45 mm or 2 inches. Order the magnets first, or at least settle on a size, then set the board to match. If yours come out a touch bigger than the stated size, raise the fit setting, which leaves a little more room round each photo.
The size also decides how big the board is. Twelve 2 inch photos, four across and three down, make a board just under 250 mm square, which fills most of a 250 mm bed. At 45 mm, four across, it comes to about 220 mm square, and twelve 1.5 inch photos four across make a board about 190 mm square. You can also choose three across for a taller, narrower board; if the rows would be too tall for the bed, the file adds a column.
The 2 inch photo reads best from across a room. The smaller sizes suit a fridge door or a smaller printer.
How it hangs
There are three choices for the back.
- Keyholes. Two keyhole slots hidden behind the name. Put two screws in the wall 60 mm apart with their heads 3 mm out, and the board slips over them and sits flat.
- Fridge. Two round pockets in the back for 10 x 2 mm magnets, so the board sticks to the fridge where the family will see it at breakfast.
- Flat back. Nothing cut into it, for mounting strips or a shelf.
The keyholes and the fridge magnets sit behind the name, where there are no pockets, so the board hangs straight.
Printing it
It is one flat piece, printed face up with no supports. Two colours in stacked layers: the board first, then change filament when the name, the tags and the line round the edge start. No multi-colour printer is needed.
Once it is cool, glue a small round magnet into each pocket's seat, all the same way up, so every photo magnet sticks. The seats are sized for 10 x 2 mm magnets by default; set the size to match the ones you have.
White with a soft colour suits a nursery. Pick a colour that goes with the room the board will hang in, since it is on the wall for a year.
At the first birthday party
By the first birthday the board is full, and it becomes the party's photo display without anyone having to make one. Take it down from the wall, prop it on the cake table, and guests can see the whole year in a glance: the scrunched newborn in pocket 1, the first proper smile, the crawling, the standing.
After the party it can go back on the wall as it is. Or move the favourites to a photo magnet stand, which takes 2 inch photo magnets among other sizes and has a topper that plugs in and swaps out, so the same stand can say the baby's name now and Merry Christmas in December.
Matching photos for every pocket
The photos look best when they match. Baby milestone discs are the discs laid beside the baby in the monthly photo, 1 MONTH to 12 MONTHS with the baby's name round the top. Take each month's picture with its disc, order it as a photo magnet, and it goes straight into the matching pocket. Print both in the same colours and they read as one set. Our post on the milestone discs covers which discs a set needs.
As a present
It works as a baby shower present, given with the first photo magnet in place, or a present for grandparents who want their own copy of the year: Olivia's First Year on one fridge, Noah's on another. Our baby shower gifts post has more for the same table, the birth stats keepsakes mark the day the year starts, and the new baby gifts page collects the rest.
Selling first year photo boards
Selling the prints comes with the Seller plan. The board suits shops that already print monthly photo magnets: sell the board with the first magnet, and the other eleven month by month as the parents send in each photo. That turns one order into a year of small ones.
It also works as a baby shower bundle, the board with the first magnet in its pocket, or alongside a set of milestone discs so the parents have the props and the place for the photos in one box. Send a proof of the name and the tags before printing, and check the spelling of the baby's name twice.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.