Claim tags for repair shops and tailors: a numbered pair that snaps in two
Every shop that takes a job in and hands it back later needs two matching numbers: one on the job, one with the customer. A printed pair that snaps apart replaces torn paper slips. How it works, how to print a hundred, and how to sell them to the shops on your street.
Any shop that takes an item in and hands it back later needs a claim system: two matching numbers, one on the item and one with the customer. It is the same idea as a cloakroom or coat check, where the customer gets a ticket and a matching ticket goes on the coat. A good system has three properties: the two halves can't be mixed up before they are used, the half on the job stays attached however it is handled, and numbers run in sequence so a missing one is noticed.
Many mobile repair shops, tailors and cobblers use a paper slip torn in two, one half taped to the job and the other given to the customer. It works until the tape lets go or the slip gets wet, and then there is a drawer of phones and an argument.
A pair that can't be mixed up
The job tag pair prints as two halves joined by three thin bridges. Both halves carry the same number. The bigger half has a hole and is tied to the job; the smaller one snaps off along a dashed line and goes home with the customer, with the shop's name and phone number on it.
Because the two halves print as one piece, a pair can't be separated or mismatched before it is used. After that, the numbers do the work.
Which shops need them
- Mobile, laptop and watch repair: small, similar-looking jobs that sit for days.
- Tailors and alteration shops: a tag pinned to each garment, with the delivery day written in the book against the number.
- Cobblers, key cutters and cycle shops: jobs left in the morning and collected in the evening.
- Dry cleaners and laundries, cloakrooms at events, and valet parking.
Printing a hundred
A pair is 92 by 32 mm, so a plate holds a dozen or more. Each plate needs one filament change, where the numbers start. Bright yellow or orange with black numbers is easy to find among jobs. PETG is tougher than PLA (see Prusa's PETG guide) and stands up to handling and a wipe-down. At a dry cleaner, take the tag off before the garment goes in the machine: dry cleaning uses solvents such as perchloroethylene and hydrocarbons, not water, and a printed tag isn't made for them.
On the Seller plan, paste the numbers into a bulk order, one per line, from 001 to 100. The shop's name and phone number stay the same on every pair. Lay the files out on plates in number order, so each plate is a block of the sequence and a missing number is easy to reprint.
The bridges are three layers thick. Keep the first layer from being squashed, or they become hard to snap.
Selling them
This is a walk-in sale. Print ten pairs with the shop's own name and number on them, numbered 001 to 010, and put them on the counter. Seeing their own name on a working pair lets the owner judge it in seconds.
Quote for a hundred and for two hundred and fifty. Tags get lost, so there is often a repeat order: note which numbers they are missing and reprint just those. The same counter needs a UPI QR stand, and the shop's shelves take shelf talkers; how to sell 3D prints to local shops and market stalls covers the approach.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.