A dog lead holder with a name to 3D print: the dog's own hook by the door

A personalised dog lead holder: the dog's name on a bone by the door, with hooks under it for the lead, the harness and the towel. Why the hooks print lying flat, how it goes on the wall, and a new puppy set with a tag and a bed sign in the same name.

A dog lead holder with a name to 3D print: the dog's own hook by the door

Every walk starts with the same hunt: the lead is on the stairs, the harness is in the car and the towel for muddy paws is somewhere in the wash. A row of hooks by the door ends it. Before buying or making one, think about what it has to hold: a lead and harness weigh little, but a wet towel or a heavy chain lead adds up, and the fixing into the wall matters as much as the hooks. Put it at a height the person walking the dog can reach and a puppy can't chew.

A personalised version, a dog leash hook board with the dog's name on it, also makes a present for a new owner.

What it is

The lead hook board is a bone with the dog's name across it and hooks underneath for the lead, the harness and the towel. A paw print sits each side of the name, and a small line goes under it: WALKIES, LEADS, or whose turn it is. The board can also be a rounded plate or a house, which suits a cat's carrier strap, the children's school bags or the family's keys.

It comes 160 to 250 mm wide, with one to five hooks that reach 20 to 44 mm out from the board.

Why the hooks print lying flat

A hook printed standing up out of a plate is a stack of small layers, and it breaks at its root. Filament maker Polymaker explains that prints are typically weakest along the Z axis, across the layers, and most likely to split along the layer lines. These hooks are separate flat pieces printed lying on their side, so the plastic runs round the bend in unbroken lines.

Each hook threads through its slot from behind, tip first, until its back bar meets the board. A spacer goes behind each screw hole, and two screws hold the board to the wall. The wall then holds the hooks in, so there is no glue.

The hooks are made for leads, harnesses, collars, keys and a towel. They are not for heavy coats or bags of shopping. Print them in PETG with four walls (Prusa notes that a print's strength comes mostly from its perimeters, not the infill), and test a hook with what you mean to hang on it before it goes up.

Printing a dog lead holder personalised with a name

  • The board prints flat, face up, with no supports. Change filament when the name starts, and the name and paws come out in the second colour on top.
  • The hooks and spacers print in the board's colour on a second plate.
  • PETG is the better choice for the hooks; Prusa's PETG guide credits its tenacity and flexibility with stopping parts breaking.
  • A hook should push through its slot by hand and not rattle. If it is tight or loose, change the slot clearance and reprint the board.

You don't need a multi-colour printer: the two colours are stacked layers with one filament change.

A new puppy set

A puppy arrives with nothing of its own. Three pieces in the same name and the same colours make a set that covers the door, the collar and the bed.

  • The lead hook board for the hall, with the puppy's name and WALKIES under it.
  • A bone pet ID tag with the name and the owner's phone number, printed in PETG and hung on a strong split ring. Check what a tag must show where the owner lives; in England a dog in public needs the owner's name and address on its collar tag. Plastic wears faster than metal, so tell the owner to check it every few weeks and replace it when the lettering wears down.
  • A pet bed and crate sign with the name big and a line under it: SLEEPS HERE, OFF DUTY, or the day they came home. It screws onto a crate door, kennel or hutch.

Add a treat jar label if the set needs a fourth piece. For more on tags, see 3D printed pet ID tags.

Who buys one

  • New puppy owners, and the friends and family buying for them.
  • Breeders, who give a sign or a tag with each puppy. Ask for the litter's names in one list and paste one per line into a bulk order.
  • Groomers and pet shops, for their own walls and to sell at the counter.
  • Anyone with a pile of keys by the door. The house shape with the family's name, such as The Johnsons, and KEYS under it works without a dog.

Bulk orders and the right to sell what you print come with the Seller plan. When you sell the lead hook board, bag the hooks, the spacers and two screws with it, so the customer has everything to put it up. The pet owners page has the rest of the pet range.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading