# How to make a personalised Christmas ornament STL for free

> Put a name and the year on a Christmas ornament, check the picture, and download a print-ready STL or a two-colour Bambu project, free. What to type, which ornament to pick and how to print it in two colours.

Web page: https://stlmint.app/blog/free-personalised-christmas-ornament-stl

By Neha Parsiya (https://stlmint.app/authors/neha-parsiya). Published 2026-10-17, updated 2026-11-18

Most Christmas ornaments are [reused year after year, and family collections mix bought ones with ones made at home](https://en.wikipedia.org/wiki/Christmas_ornament). That is why a name and a year matter: they turn a plain bauble into a record of who was there that Christmas.

A few things decide whether a printed ornament works:

- **Lettering size.** Ornaments are read from a step or two away, so short words in bold capitals beat long names in thin type.
- **Material and heat.** PLA is the usual choice, but Prusa notes it [gets soft and deforms above about 60 °C](https://help.prusa3d.com/article/pla_2062). Keep printed ornaments clear of hot bulbs and out of a hot car.
- **Two colours without a multi-colour printer.** Slicers can pause for a [filament change at a chosen layer](https://help.prusa3d.com/article/color-change_1687), so a base in one colour and raised letters in another needs only one nozzle.

You don't need to model anything: on the [free Christmas ornament page](/free/christmas-ornament-stl) you type the name, look at the picture, and download the file. One file a day is free, with no card.

## 1. Pick the ornament

Three kinds cover most of what people make:

- **A name and a year.** The [ornament keepsakes](/designs/seasonal-keepsakes) put a name across the middle and a short second line underneath. The year is the classic second line; "1ST XMAS" works for a baby's first Christmas.
- **A family set.** The [family ornament set](/designs/family-ornament-set) takes a list of names separated by commas and makes one matching ornament per person, with the family name.
- **Stocking and gift tags.** The [stocking name tag](/designs/stocking-name-tag) is a mitten, gingerbread figure, bauble, star, tree or candy cane with a name on it, to hang on a stocking or a present.

## 2. Type the words

Short words print best. The lettering is fitted to the ornament, so a long name still fits, but a short one stays bolder and easier to read from across the room. If a name is too long to keep the letters thick enough to print, the studio says so before you download.

Good second lines are short: the year, "1ST XMAS", "NOEL", or the family name. Capital letters read well at this size.

## 3. Check the picture

The picture is rendered from the exact file you download, from three angles. Check the spelling here: what you see is what prints.

## 4. Download and print

You get two files:

- an **STL** that opens in any slicer, and
- a **Bambu Studio project** with the base and the lettering already set as two colours.

Print flat on the bed with no supports. On a printer with one nozzle and no colour changer, add a filament change at the layer where the letters start: the base prints in one colour and the letters in the other. White or gold letters on red, green or navy read well and look traditional.

The hanging hole is printed in, so a ribbon or ornament hook goes straight through.

## Making more than one

The free file is one ornament design a day, for your own tree and gifts. Downloading the same ornament again, or as the other file type, never counts. If you're making ornaments for a whole class or a market stall, a [Party pass](/#pricing) gives you 200 files a day for a week and lets you paste a list of names to get one file per name in a ZIP. To sell the ornaments, you need the Seller plan.

For more ideas, see [Christmas stocking fillers to print and sell](/ideas/christmas-stocking-fillers).
