A fundraising thermometer to 3D print: a block for every tenth of the goal
A fundraising thermometer with the appeal's name and amount on it and a tube that fills with ten red blocks, one for each tenth of the goal. How it works, how to set it up for a school, a club or a child's savings, and how to print and sell it.
School appeals and club fundraisers often use the same poster: a fundraising thermometer drawn in marker pen and coloured in a bit at a time. It works because it shows three things at once: what the money is for, how much is needed, and how far there is still to go.
The first of those deserves care. The Charity Commission's guidance for trustees in England and Wales, Charity fundraising (CC20), says money raised for a specific project becomes a restricted fund that must be spent only on what the appeal said, and suggests naming a secondary purpose in case more is raised than needed. If the thermometer says NEW KIT, the appeal wording should cover what happens to any extra. A goal doesn't have to be money either: the Reading Agency's Summer Reading Challenge has children set a reading goal and collect rewards as they go, and the same visible tally works for books, miles or days.
A paper poster lasts until it curls off the wall. A printed goal thermometer does the same job on a board that lasts the whole appeal and the next one, and it works as a goal thermometer for kids' savings at home too.
What it is
The goal thermometer is a board with a tube up one side and a scale beside it. Ten blocks stack up inside the tube. Each block stands for a tenth of the goal, so with a goal of 200, each block is 20. When another tenth is in, another block drops in and the red column rises.
The scale shows nothing at the foot, half the goal half way up and the full amount at the top. Over it goes a line such as SAVING FOR or RAISING, then the goal's name, and at the bottom one more line: a child's name, a class, a club.
How the blocks go in
Lift the cap out of the top of the tube, drop a block in so it slides down on to the others, and put the cap back. The edges of the channel lean in over the blocks, so they can't fall forward or be picked out. That last part matters in a school corridor.
A fundraising thermometer for a school or club
For an appeal, type the name of what is being raised for and the amount. The design page's own example is a club's new kit: RAISING over NEW KIT, a goal of 1500 with a dollar sign, and RIVERSIDE FC along the bottom. A PTA would put the playground, the minibus or the library in the same place.
The goal doesn't have to be money. Leave the amount empty and the scale reads 0%, 50% and 100%. Or type a number with no sign for miles walked on a sponsored walk, books read in a reading challenge, or days. One example on the page is a class's books: BOOKS READ, CLASS 3, SPRING TERM, standing on a shelf.
It hangs on the wall or leans back on two feet, and it is 160 to 250 mm tall. On a reception desk or the front of a classroom, the standing version is easy to move when the appeal moves.
A goal thermometer for kids' savings
At home the same board turns a savings target into something a child can see. SAVING FOR, A NEW BIKE, and the child's name at the bottom. Each time they reach another tenth, they put a block in themselves. A number in a bank app means little to a seven year old; a column that is taller this week than last does not need explaining.
For the saving itself, reward coins give children something to earn for jobs and count out, and a tip jar lid turns a mason jar into a savings jar with a slot and a name on it. The post on reward coins for kids and classrooms has more on how families and teachers use them.
Printing it
It needs three colours, and no multi-colour printer:
- The board and its words print flat, face up, with no supports. They are two colours in stacked layers, with one filament change when the words start.
- The ten blocks and the cap print separately in a third colour. Red is the one everybody expects.
- If the blocks are stiff in the tube, raise the clearance and reprint the blocks.
There is nothing to glue. A board for a club looks right in the club's own colours with red blocks; for a child's room, pick their favourite colour for the board.
Selling them
Schools, clubs and charities run more than one appeal, each with its own name and amount, so a buyer may come back for the next one. Offer it to a school office or a club secretary with their appeal's name already on the preview. For a school with an appeal in every class, paste the class names one per line into a bulk order and each board comes back with its own class at the bottom. Bulk orders and the right to sell the prints come with the Seller plan.
Parents are the other buyers: a thermometer with a child's name and a goal, sold with a sheet of reward coins. The teachers and schools page has more for the same customers.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.