Letterbox number plates and meter number labels: a whole run in one file
Letterbox number plates and meter number labels made as a set: set the first and last numbers and up to sixty plates come out at one size, with a wing letter and a small word if needed. Shapes, sizes, fixing them, and matching door and parking plates for a society.
Every building has a row of things that need a number and rarely get a proper one: the letterboxes in the lobby, the meters in the meter room, the hooks in a cloakroom. They get marker pen on tape, which fades. Postal services care about this: USPS's mailbox guidelines ask owners to put the house or apartment number on the mailbox, and its annual checkup list includes replacing missing or faded numbers. Whatever the building, the same three things make a number work: it is big enough to read from where the person stands, it contrasts with what is behind it, and it is fixed so it can't be swapped or knocked off.
Letterbox number plates and meter number labels printed as a set cover the whole row in one go, all the same size and colour.
A run, not a list
The number plate set works from two numbers: the first and the last. Set 1 and 24 for a bank of letterboxes, or 101 and 112 for one floor's meters, and the plates are laid out for you. Up to sixty fit in one file, spread over as many print plates as they need. For a longer run, make a second file that starts where the first ends.
Every number comes out at the same size, the size the widest number in the run fits at. A row of them looks like a set, with 9 and 24 the same height.
Two small extras cover most buildings:
- A letter or two before each number, for the block or wing: A-1, B-12.
- A small word under each, to say what it is: METER, LOCKER, BAY.
Shapes and sizes
There are three shapes. A rounded plate with a screw hole at each end suits letterboxes and doors. A round disc with one hole at the top suits meters. A tag with a ring hole is for keys in a cabinet. Plates are 30 to 120 mm across.
Dark plates with white numbers read best in a dim meter room.
Meter number labels
Meter rooms are often numbered once with a marker and never again, and a meter reader or engineer who can't tell which meter is whose may read or switch off the wrong one. A disc with 101 and METER under it, fixed beside each meter, settles it. Make one run per floor so each floor's numbers start where its flats do.
Fixing them
The rounded plate takes two small screws, the disc one. Check the hole size against your screws on the first plate before you print the run. Choose no holes for a flat back and fix them with outdoor double-sided tape, which suits metal letterboxes and meter boxes you shouldn't drill.
Print them in PETG for letterboxes and gates that see sun and rain; Prusa rates PETG for most exterior use, while its PLA guide says PLA is not suited to outdoor use and degrades under UV. PLA is fine indoors.
A society's whole set
A housing society that numbers its letterboxes usually wants the rest to match. Three designs share the job:
- The letterboxes and meters: the number plate set, a run at a time.
- The doors: the flat number plate, with the flat number large, the wing letter set apart and the society's name in small type.
- The parking: the parking slot plate, with a P in a block, the flat number big enough to read from the car, and VISITOR or EV for the shared bays.
Door and parking plates carry a flat number each, so they come from a list. On the Seller plan, paste the flat numbers one per line into a bulk order and every plate comes out the same but for its number. Bulk orders and the right to sell come with the Seller plan. Choose the same colours for all three and the building reads as one job.
Our guide to flat number plates for housing societies covers taking the committee's list, samples and delivery by wing. The same steps work here, and the run is simpler because the numbers count themselves.
Other places a run is useful
Anything numbered in order: lockers and coat hooks in a school, seats and tables in a hall, bins and parking bays, key cabinets in an office. A school orders 1 to 30 for the coat pegs; a club orders lockers with LOCKER under each number.
Printing a run
The plates print flat, face up, with no supports. The colours are stacked layers with one filament change where the numbers start, so no multi-colour printer is needed.
For sellers
Quote by the run. A society or a school orders the whole set at once, and the meter room often leads to the doors and the basement. The housing societies and apartments page has more for the building.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.