# Run an NFC card design service from your 3D printer

> Small businesses search for someone to design their NFC cards. With a 3D printer and a pack of tags you can offer the whole service: design, proof, print, write and test. What to offer, what to charge and how to run each order.

Web page: https://stlmint.app/blog/nfc-card-design-service

By Neha Parsiya (https://stlmint.app/authors/neha-parsiya). Published 2026-10-16, updated 2026-11-18

## How an NFC card works

An NFC card is a plastic card with a small passive tag inside. [Near-field communication](https://en.wikipedia.org/wiki/Near-field_communication) works over 4 cm or less, so the phone has to touch or nearly touch the card; the tag has no battery and is powered by the phone. The tag holds a short record, usually a web link, which the phone opens when it taps.

The common chip for business cards is the NXP NTAG213. It holds [144 bytes of user memory](https://www.wakdev.com/en/knowledge-base/nfc-chips/nxp-ntag213.html), enough for a website or review link but not for a full contact card with a photo, and it can be read by almost every NFC phone. Tags can be locked after writing so nobody can overwrite them, but a locked tag can't be changed by you either.

The most common uses for a small business are a link to its website or link-in-bio page, a Wi-Fi login, and a review link. Google lets a business [create a link or QR code that asks customers for a review](https://support.google.com/business/answer/3474122), and that link is what goes on a tap-to-review card.

A café owner who wants tap-to-review cards, or a freelancer who wants a card a phone can read, may search for an "NFC card design service". Many of the results are plain white cards with a tag on the back. A 3D print seller can offer a card in the business's own colours, with the name and logo in the plastic, the tag sealed inside, and the link written and tested.

This post is about running that as a service. For the printing itself (which tags to buy, sealing them in, writing them), see our guide to [3D printing NFC business cards](/blog/3d-printed-nfc-business-cards).

## What the customer is really buying

Many people who order NFC cards have never written a tag and don't want to learn. They are paying for four things:

1. **A design that looks like their business.** Their colours, their name, their logo, and a card that feels deliberate rather than generic.
2. **A link that works.** The right page, tested on an iPhone and an Android phone before it leaves you.
3. **No setup.** The cards arrive ready to hand out or put on the counter.
4. **Someone to call** when staff change or they want more.

Price and sell those four things. The plastic and the tag are a small part of it.

## A service menu that's easy to say yes to

Keep it to a few clear packages rather than a price list of options.

- **Starter: contact cards.** A set of business cards for one person, all pointing at the same website or link-in-bio page. Pick from the [standard NFC card](/designs/nfc-business-card), the [stripe card](/designs/stripe-nfc-business-card), the [signal ring card](/designs/signal-nfc-business-card) or the quieter [framed card](/designs/framed-nfc-business-card).
- **Team: a card per person.** The same design with a different name, title and link on each. On the Seller plan, paste the staff list into Bulk order and get one file per person.
- **Counter kit: reviews and Wi-Fi.** [Tap to review cards](/designs/nfc-review-card) for the tables, a [review stand](/designs/review-stand) for the till and a [Wi-Fi card](/designs/nfc-wifi-card) or [Wi-Fi sign](/designs/wifi-sign) for guests. This suits cafés, salons and clinics, and tables and staff change, so there is reason to reorder.
- **Social: follow cards.** A [tap to follow card](/designs/nfc-follow-card) for Instagram or TikTok, to go in every parcel or sit by the till.

Each card also carries a QR code over the tag, so phones with NFC switched off still reach the page. Mention it: buyers often ask what happens if a phone can't read the tag.

## Running an order, step by step

### 1. Collect everything in one go

Ask for all of it in one message so you aren't chasing details later:

- business name, person's name and title (one per card for a team order)
- the link each card should open, copied from their browser rather than typed
- logo, if they want one, and two colours
- how many cards, and where they'll be used (wallet, counter, table)

For team orders, ask for a spreadsheet or a pasted list. Our post on [avoiding misspelled names on custom orders](/blog/avoid-misspelled-names-on-custom-orders) has a checklist that works here too.

### 2. Send a proof

Make the card in the studio and send the rendered picture for approval, with the link written underneath in plain text. Ask them to check the spelling of every name and open the link themselves. Don't print until they have replied "approved".

### 3. Print

The cards print flat, face up, with no supports. A full bed of cards in one colour pair takes one setup, so batch the order (see [batch 3D printing for custom orders](/blog/batch-printing-custom-orders)). If the tags are sealed inside, stay near the printer for the pause; if you'd rather not, choose the lid option and press the tags in afterwards.

### 4. Write, lock and test every tag

Write each tag with a free app such as NFC Tools, then tap it with two phones. For a team order, tap every card against your list: it is easy to put Sophia's link in Sam's card. Lock the tags if the customer agrees, and tell them you have.

### 5. Deliver it ready to use

Pack the cards in list order with a short note: how to tap (back of the phone, flat on the ring), that the QR code works too, and how to reorder. A short video of one of their own cards being tapped makes a good handover and a better advert.

## What to charge

Work out your per-card price as you would for any print (material, printer time, your time), then add the parts that belong to the service:

- **Design and proof.** A flat fee per order, not per card. One round of changes included; further rounds charged.
- **Tags.** The cost of the tag plus a little for the ones that fail when tested.
- **Writing and testing.** A minute or two per card adds up on a team order. Charge for it.
- **The pause.** Sealed tags need you at the printer. Price the sealed option above the lid option, or offer lids by default.

Team and counter-kit orders are worth more than their card count suggests, because the design work is done once. Our guide to [pricing personalised 3D prints](/blog/how-to-price-personalised-3d-prints) covers the per-piece maths.

## Where to find customers

- **Local businesses you already buy from.** Show the owner a review card with their own name on it.
- **Coworking spaces and offices.** New joiners need cards; office managers like ordering in batches. The [offices and coworking](/ideas/offices-and-coworking) ideas page has more to bundle with them.
- **Hotels, guest houses and holiday rentals.** A Wi-Fi card for every room and a review stand for reception. See the [hotels and guest houses](/ideas/hotels-and-guesthouses) ideas page.
- **Cafés and salons.** Lead with the counter kit. See [3D printed signs and tools for cafés](/blog/3d-printed-signs-and-tools-for-cafes).
- **Instagram and WhatsApp.** A five-second tap video is the whole advert. Our post on [taking custom orders on Instagram and WhatsApp](/blog/custom-orders-on-instagram-and-whatsapp) covers the order flow.

## Common questions

**Do I need to be a designer to offer this?**
No. The designs place the name, contact lines, logo and tag ring for you and fit long names automatically. Your job is choosing the design and colours that suit the business, and checking the proof.

**Can I change a link after the cards are delivered?**
Only by rewriting each tag in hand, and not at all if it is locked. Point the tags at a page the customer controls, such as their website or a link-in-bio page, so they can update the page instead of the cards.

**What if a customer's phone won't read the card?**
Check NFC is switched on (on many Android phones it is a setting), take the phone out of a thick or magnetic case, and hold it flat over the ring. The QR code is the fallback.

**Can I sell cards made from STLmint designs?**
Yes. On the Seller plan you can print and sell as many as you like through any channel.

Browse all the [NFC business cards](/designs/business-cards) to put your packages together.
