Order here and pick up here signs for counters: one sign, two messages
A counter sign with ORDER HERE on the side facing the queue and PICK UP HERE on the side facing the people waiting. How one flat print gets words on both faces, what else it can say, and the flip sign and bell plate that go with it.
At a busy counter the same two questions come all day: where do I order, and where do I wait. A counter sign answers them only if it can be read quickly from where people stand. The US Access Board's guide to the ADA sign standards sets out what makes a sign legible: plain letters rather than script or decorative faces, light-on-dark or dark-on-light contrast, a non-glare finish, and letter height that grows with viewing distance. A movable counter sign may not be covered by those rules, but the same principles decide whether it works. Short words, one message per face and an arrow do most of the job.
An order here sign and a pick up here sign answer the two questions, but two signs take two spots and still face the wrong way for half the room. One sign standing on the counter can do both, with a message for each side.
One sign, two messages
The two-face counter sign has a different message and arrow on each face. ORDER HERE points along the queue on one side; PICK UP HERE points the other way for the people already waiting. Each arrow is set as you see it from that side: left, right, down or none. The sign stands on two feet that slot on to notches in its bottom edge and hold by friction.
It comes rounded, arched or round, 110 to 240 mm across.
How both faces are printed
It prints in two colours on an ordinary printer, with two filament changes. First comes a thin skin in the words' colour, with the back's words left out of it. Then the plate prints in the second colour, which shows through those gaps. Then the front's words print on top in the first colour again.
So the front's words stand out from the face, and the back's are cut through a thin skin and sit flush. The back's words are drawn mirrored on the bed, so they read the right way round from behind. Print it with the back face down on a smooth plate, because the back's finish is the bed's. Strong contrast between the two colours matters most for the back, since its words are flush. Pick colours that differ in lightness, not just hue: the most common colour vision deficiency, as the National Eye Institute explains, makes red and green hard to tell apart. A matte filament helps too, since a glossy face catches the light, the same reason the ADA guide asks for a non-glare finish. There is no glue and no supports.
Please wait to be seated, and other pairs
Every line is your own. A please wait to be seated sign for a restaurant door can carry PLEASE WAIT / TO BE SEATED on the front and THANK YOU / SEE YOU SOON on the back, for guests on their way out. A pharmacy can have PAY HERE with an arrow down on one side and COLLECT PRESCRIPTIONS on the other. Takeaways, bakeries, delis, food trucks, reception desks and market stalls all have a pair of their own.
Before printing, ask which way each arrow should point as seen from its own side, and check both faces in the preview.
A flip sign for the window
The walk-in flip sign uses the same way of printing for a sign that is turned round rather than read from both sides at once. WALK-INS WELCOME is on the front and FULLY BOOKED TODAY on the back, in opposite colours, so the change is clear from across the street. It hangs from a cord, a small chain or a suction hook in the window, and you lift it off and turn it round. The same file says OPEN / CLOSED for any shop, or BACK IN 10 MINUTES for a stall.
A plate for the bell
When there is nobody at the counter, the counter bell plate tells people what the bell is for. It is the plate the bell sits on, with PLEASE RING over it and FOR SERVICE under it on the round version, or two lines and the shop's name on the long one. A raised ring, sized to the foot of your bell, keeps the bell in its place. Measure across the foot before printing, as bells sold as the same size vary by a few millimetres. Ring for service signs for small shops has more on it.
Printing tips
The flip sign and the two-face sign print back face down with two filament changes; the bell plate prints face up with one, where the words and the ring start. All of them print flat with no supports and no multi-colour printer.
Selling them
The right to sell these comes with the Seller plan, and each sign is made with the shop's own wording. Watching a café's counter at its busiest hour shows whether people are confused about where to order and wait. Sell the counter sign with a bell plate in the same colours, and offer the flip sign to the salons and shops on the same street. The shops and market stalls ideas page has more for the same customers.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.