Personalised coasters to 3D print: a name coaster set from one list
Personalised coasters for everyone in the house, made from one list of names: the initial big in the middle, the name round the edge and a raised rim. Round, square or hexagon, what to print them in for hot mugs, and two more pieces that keep track of whose drink is whose.
A coaster has two jobs: keep heat and drips off the table, and sit flat so a mug doesn't rock. Heat is the one that decides the material. A review in the Journal of Food Science by Abraham and Diller found that coffee is typically poured at about 83 to 86 °C and tea at 86 to 88 °C, and a mug's base passes much of that on. That is above the 60 to 65 °C at which PLA softens, which is why a printed coaster for hot drinks needs a more heat-resistant plastic. Unlike cork or stone, a plastic coaster doesn't absorb condensation, so a raised rim that holds drips helps under cold glasses.
In a house of four there are often more mugs on the table than people, and nobody sure which is theirs. Personalised coasters settle it: one per person, each with its owner's name on it, stacked by the kettle when they aren't in use. These are 3D print files, so a name coaster set is made to the family's own names, and the whole set comes from one list typed once.
A name coaster set from one list
The coaster set with everyone's names takes a list such as Liam, Emma, Mom, Dad and makes a coaster for each. Every coaster has its owner's initial big in the middle and the name round the edge, inside a raised rim that keeps a drip off the table.
If an initial isn't enough, switch the middle to the whole name. That also works for words that aren't people: TEA and COFFEE on a pair of square coasters, for a kitchen where the question is what's in the mug, not whose it is.
Shapes, trims and sizes
- Round, square or hexagon. Hexagons look good laid out together on a tray; squares suit a plain modern kitchen.
- A ring of dots, a wreath or nothing between the rim and the middle. The wreath suits a wedding or Christmas set; plain suits whole words.
- 80 to 120 mm across. The standard is 95 mm, and four fit on a 250 mm plate. A longer list is laid out on further plates.
There are six lettering faces, from a bold sans to Lobster and Pacifico for script names. A couple's pair of hexagons with a wreath and their names in Lobster is one of the examples on the design page.
The rim, the trim and the letters are all the same height, so a mug rests on them evenly and doesn't rock.
Print personalised coasters in PETG
PLA softens with heat, so a mug straight from the kettle can leave a ring on a PLA coaster. Print coasters in PETG, which Prusa's PETG guide credits with good temperature resistance and which takes a hot drink.
Each coaster prints flat, face up, with no supports. The colours are stacked layers: the coaster first, then a filament change when the lettering starts, so no multi-colour printer is needed. Use one colour for the whole set, or give each person their own lettering colour so the set reads at a glance from across the table.
The back is the smooth side from the bed. On a soft or polished table, add small felt or cork pads underneath.
Two more for the same table
The coasters belong to a small family of pieces that answer the same question.
- The family crossword sign puts the surname across on letter tiles and each first name down through it where they share a letter. Made in the same names as the coasters, it is a matching housewarming pair: the set by the kettle and the sign in the hall.
- The glass rim marker is for the party rather than the everyday. A small name badge on a clip slides onto the rim of a glass, cup or can, and its slot narrows as it goes up, so one clip fits a thin wine glass and a chunky tumbler alike. A mug setting covers thick ceramic rims of 3 to 7 mm.
Who buys coaster sets
- Housewarmings. A coaster for everyone moving in, tied with ribbon.
- Weddings. The couple's two names, for example as hexagons with a wreath.
- Shared flats and office tea rounds. One per person ends the mystery of the mug left in the sink.
- Guests for the weekend. A coaster each on the bedside table.
For sellers
Ask for the names and send the preview before printing. A family's set is a single file from a single list, so there is nothing to lay out by hand.
For parties, the rim markers are the larger orders. Paste the guest list into a bulk order, one name per line, and you get a file for each guest; each marker takes a few minutes to print, so a party fits on one or two plates. Bulk orders and the right to sell the prints come with the Seller plan.
The housewarming gifts page has more for a new home, and housewarming gifts for the kitchen goes further into that one room.
Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.