# Personalised drink markers to 3D print: rim markers and wine glass stem rings

> Glass markers are a quick, cheap party order that every guest needs. Two designs, one for the rim of any glass and one for wine glass stems, how they stay on, and how to sell them by the guest list.

Web page: https://stlmint.app/blog/personalised-drink-markers-to-3d-print

By Neha Parsiya (https://stlmint.app/authors/neha-parsiya). Published 2026-10-23, updated 2026-11-18

At every party, someone puts their glass down, turns round, and comes back to five glasses that look the same. A drink marker tells them apart. There are three common kinds:

- **Wine glass charms**: small rings that hang round the stem with a bead or colour on them. They only fit [stemmed glasses](https://en.wikipedia.org/wiki/Wine_glass) (bowl, stem and foot) and identify by colour, not by name.
- **Rim clips**: a badge on a clip that slides over the rim, so they work on tumblers, cups and cans too.
- **Pens and stickers**: cheap and disposable, but they rub off or peel when the glass is wet.

Whatever the kind, two practical points matter. A marker on the rim sits where lips and drink can touch it, so it should stand above the drink rather than hang into it. And a stem marker has to suit the stem width, which varies from glass to glass.

A printed marker can carry the guest's actual name in the party's colours, and one design covers the whole table. Every guest needs one, so a party is naturally a bulk order. Here are two ways to do it.

## On the rim: the glass rim marker

The [glass rim marker](/designs/glass-rim-marker) is a little badge on a clip. The clip's slot is 4.2 mm wide where the rim goes in and narrows to 1.2 mm at the top, so the marker slides down until the glass fills the slot and holds there. That one shape fits:

- wine glasses and champagne flutes
- tumblers and highball glasses
- paper and plastic party cups
- soft drink and beer cans

For mugs and chunky ceramic cups there is a mug setting, which runs from 7 mm down to 2.8 mm.

The badge comes as a circle, a heart, a star, a speech bubble or a banner that grows to fit a long name. A small line under the name takes an age, a role (BEST MAN, BRIDE), MOCKTAIL for the drivers, or the year at a New Year's party. It stands above the rim, so nothing hangs in the drink.

This is the one to lead with, because you don't need to know the client's glassware before you print.

## On the stem: the stem name ring

For a sit-down dinner with wine glasses, the [stem name ring](/designs/stem-name-ring) is the smarter piece. It is a flat ring with a slot that the stem goes through. Inside, a narrow collar is cut free all round except at the top, so it springs open as the stem passes and clicks shut behind it. The ring then drops onto the glass's foot and sits there like a small coaster, with the name arched round the top and stars, hearts, dots or bubbles beside the slot.

The fit matters, so ask for the stem width: measure across the stem just above the foot. The file defaults to an 8 mm stem and the width is adjustable, because stems vary. Print one and try it on the client's glasses before the set.

At weddings it doubles as a favour: guests take the ring home.

## Which one to offer

| | Glass rim marker | Stem name ring |
|---|---|---|
| Fits | Almost any glass, cup, can or mug | Stemmed glasses |
| Reads from | The side | Above |
| Best for | House parties, birthdays, bars, office parties | Weddings, dinners, wine evenings |
| Need to measure? | No | The stem |

The rim marker suits most parties, since it works on any glass. Wedding planners and dinner hosts tend to prefer the stem ring, often with a [napkin name ring](/designs/napkin-name-ring) at each place.

## Printing tips

- Both print flat, face up, with one filament change where the lettering starts.
- Keep script names for short names; long names read better in a bold face, or on the rim marker's banner.
- PLA is fine for a party. Bars and caterers who reuse sets should have them in PETG, washed by hand. Prusa's [food-safe printing guide](https://help.prusa3d.com/article/food-safe-fdm-printing_112313) points out that the grooves between layers can hold bacteria, so treat a marker as a label that sits on the outside of the glass, not as something that goes in the drink, and replace worn ones.

## How to sell them

Sell by the guest list, with a per-piece price and a minimum order. Ask for one message with a name on each line, send back an approval picture of the longest name, then paste the list into a bulk order on the Seller plan. Throw in two or three spares with GUEST for the people who weren't on the list.

Bars and cafés are a second market: numbered sets for group bookings, or markers with the venue's name. For bottles rather than glasses, the [bottle neck tag](/designs/bottle-neck-tag) drops over a beer or water bottle's cap; our post on [the drinks table](/blog/drinks-table-sign-and-bottle-tags) pairs it with a sign for the bar. The [parties and drinks category](/designs/parties) has every design together, and our post on [the Christmas and New Year party table](/blog/christmas-and-new-year-party-table-3d-prints) puts them in a full set with napkin rings and a garland.
