A personalised medal hanger to 3D print: the name on top, the medals under it

A medal hanger with the runner's name standing along the top and flat hooks under it that print with the hanger. How many medals it holds, how it goes on the wall, what to print it in, and who buys one: runners, swimmers, gymnasts and their parents.

A personalised medal hanger to 3D print: the name on top, the medals under it

Mass-participation races give every finisher a medal, and the numbers are large: the 2025 London Marathon set a Guinness World Records title with 56,640 finishers. Add club 10Ks, fun runs, triathlons and children's galas, and many runners and swimmers end up with a drawer of finisher medals in a tangle of ribbons.

A hanger needs three things to work: hooks long enough for a ribbon, enough of them for the collection with room to grow, and a fixing that takes the weight, since a full hanger of metal medals is heavier than it looks. A hanger with the runner's own name on it is also a present, for Christmas, a birthday or after a first marathon.

What it is

The medal hanger is a bar for the wall with the name standing along its top edge, cut to the outline of the letters, and a row of hooks along the bottom. A runner, a bike, a swimmer, a dumbbell, a football or a trophy stands beside the name, and a line of small words runs along the bar: a motto, a club's name, the year someone started running.

The hooks are part of the same flat print. Each one drops from the bar, turns along it and ends in an upturned tip, so a ribbon slips on from the open end and stays there. Because they print lying flat, the layers run along each hook and not across it, which is what makes a printed hook strong.

How many medals

Each hook's arm is at least 24 mm long, about the width of a medal ribbon. Ribbons overlap on it, so a hook holds three or four medals comfortably. The default hanger is 240 mm wide with five hooks, which is room for 15 to 20 medals. For a child's first few, a 180 mm hanger with three hooks looks less empty.

On the wall

Two screws go through the ends of the bar. The hanger comes with printed spacer rings that stack on each screw behind it and hold it 8 mm off the wall; that gap is where the ribbons pass behind the hooks. A hanger full of medals weighs a kilo or two, so use wall plugs, not tape.

Printing it

It prints flat, face up, with no supports, in two stacked colours: the hanger and its spacer rings first, then the name and the words on top after one filament change. Use PETG or a tough PLA with four walls; Prusa describes PETG's toughness and flexibility as often preventing it from breaking, which suits hooks under load. At 240 mm it fits a 256 mm bed; choose 200 mm for smaller printers.

Colours that work: navy with yellow, black with gold, white with red, or a club's own two colours.

Who buys it

  • Runners, and the people who buy for runners. Christmas, birthdays, and the week after a first marathon.
  • Parents of swimmers and gymnasts. Children's medals pile up quickly, and a hanger in the bedroom is the trophy shelf.
  • Clubs. End-of-season awards with each member's name and the club's along the bar.

Ask for the name, the sport and the colours. For lifters and runners who track numbers too, the PR record board keeps their best lifts or times on swap-in tiles beside it, and the sports clubs and gyms page has medals, kit bag tags and locker tags for the club itself.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading