Pet memorial plaques to 3D print: for a shelf, a wall or the garden

A small pet memorial plaque with a name, the years and a line of words, for a shelf beside a photograph, the wall, or the garden on a spike. What to put on it, which way to place it, what to print it in, and how to take the order kindly.

Pet memorial plaques to 3D print: for a shelf, a wall or the garden

What to know first

When a dog or a cat dies, many families want one small thing that says they were here: a name and two years, beside a photograph, the collar or the ashes, or where they are buried. Most memorials say the same three things: the name the family used, the years, and a short line. Some families add a picture with a meaning of its own: a rainbow refers to the Rainbow Bridge, the poems and stories from 1959 onwards about a meadow where pets wait to be reunited with their owners.

Where the memorial goes decides what it is made from. Indoors, almost anything lasts. In a garden it faces sun, rain and frost, and the material matters: Prusa describes PLA as unsuitable for outdoor use because it degrades under UV light, while ASA is made for outdoor use with high UV resistance and PETG suits indoor and outdoor parts.

This post is a short, practical guide to making one, for a family or for someone who prints them for others. A dog memorial garden stake is the same plaque on a spike.

What it is

The pet memorial plaque is a flat plaque with the pet's name in script, a line for their years and one more line of words, under a small picture. The pictures are a paw print, a paw inside a heart, wings with a halo, a rainbow or a heart, or none at all.

It comes in three shapes. The arch has the most room for words and suits a garden. The heart and the round plaque suit a shelf or a wall. It is made 80 to 200 mm wide.

What to put on it

Keep it short. A plaque usually says three things:

  • The name as the family used it, which is not always the name on the vet's records. MAX, or Mr Biscuit, or the name the children gave him.
  • The years, such as 2012 - 2026, or a single date. Leave the line empty if nobody is sure of the birthday.
  • A line of words. FOREVER IN OUR HEARTS is the default. Other lines: UNTIL WE MEET AGAIN, OUR BEST BOY, GOOD GIRL, or a nickname.

Any of the lines can be left empty. Names in Hindi work too.

On a shelf, on the wall or in the garden

  • On a shelf the plaque stands in a flat foot that slots on, beside a photograph, a collar or the ashes.
  • On the wall it hangs from two holes.
  • In the garden it pushes into the ground on a spike that prints as part of the plaque, in one flat piece. On a large plaque the spike is shorter, so the two together still fit a 256 mm bed.

There is also a plain back, to set it in a box frame.

Printing it

The plaque prints flat, face up, with no supports, in two colours stacked as layers: the plaque and its foot first, then a filament change when the picture starts. A single-spool printer is all it needs.

For the garden, print it in PETG or ASA, which hold up outdoors far better than PLA. Slate grey or black with cream lettering is a quiet choice for outdoors, and strong contrast stays readable as the surface weathers. Indoors, PLA is fine, and the family may want a colour that was theirs: the colour of the collar, or the bed.

Taking the order kindly

People ordering a memorial are often doing it in the first days after, and some will be ordering for a friend. A few things make it easier for them:

  • Ask only what you need: the name, the years, the words, the shape and where it will go.
  • Send the picture before you print. People notice every letter on a memorial. Check the name and the years against the order twice, then let them check too.
  • Don't hurry them, and don't upsell. If they ask, a second smaller plaque for a child's bedroom is a kind thing to offer.
  • Make it quickly once it is approved, and pack it simply.

Some vets and pet crematoria may be willing to keep a sample and a card for families who ask. If you approach one, take a finished plaque and leave it at that.

For a pet that is still very much here, the bone pet ID tag and the pet bed name sign carry the same name in happier times, and our post on 3D printed pet ID tags covers both. A family who wants to mark the day they brought a pet home can use the special date calendar, with a heart on the date and the name under it.

The right to sell the prints comes with the Seller plan.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading