Recipe box dividers and kitchen organisers to 3D print

Recipe card dividers with a stepped tab for every section and the cook's name on each, matching labels for the pantry jars, and a spaghetti measure for the hob. A new year kitchen that works, and what each piece is for.

Recipe box dividers and kitchen organisers to 3D print

A recipe box without dividers is a shuffled deck: the soup you want is somewhere behind the birthday cake.

What to know about recipe boxes

Recipe boxes are built round index cards, a filing system said to date back to Carl Linnaeus around 1760. The most common card in North America and the UK is 3 by 5 inches (76.2 by 127 mm), and 4 by 6 inches is the other usual size; A6 cards (105 by 148 mm) are also sold. Boxes are made for one card size, so a divider has to match the card, not the box's outside.

Dividers work by tabs. If every tab sits in the same place, only the front one shows, so tabs are staggered across the width, and the number of positions sets how wide each tab can be. Sections are up to the cook: by course (soups, mains, baking), by person, or by season.

Recipe card dividers turn the box back into something a cook can use with floury hands. With the cook's name on each one, they become personalised, and a present. This post covers the dividers and two more kitchen organisation pieces to 3D print for the new year: labels for the jars and a measure for the pasta.

Recipe card dividers

The recipe card dividers come as a set from one typed list of sections, up to twelve of them: SOUPS, MAINS, SIDES, BAKING, DESSERTS. Each divider has a tab along the top, and the tabs step across from left to right so every one shows. With three places, the fourth divider's tab is back at the left; choose up to five places for more, narrower tabs.

The section is printed again, large, on each divider's face, and the cook's name runs along the foot.

Recipe box dividers, personalised

The name along the foot is what makes a set a present. EMMA'S RECIPES is the default. One example on the page puts a relative on each tab instead, NANA, MOM, AUNT MIA, MINE, with THE JOHNSON FAMILY RECIPES along the foot, which suits a wedding present of family recipes.

The sections are typed as one list with commas between them.

Will they fit the box

The dividers are made for 4 x 6 inch cards, 3 x 5 inch cards or A6. Each divider is as wide as its card and 2 mm taller, with a 12 mm tab above that. Measure the inside of the box: it needs to be a little wider than the card and tall enough for the tab with the lid shut.

At the standard setting they are 1.4 mm thick, stiffer than card and thin enough that a dozen don't fill the box. A splash wipes off with a damp cloth. Keep them away from the hob, as PLA softens and deforms above about 60 °C.

The same dividers sort other boxes too: seed packets by season, index cards, receipts.

Kitchen organisation beyond the box

Two more pieces carry the same idea round the kitchen.

Pantry labels. Type FLOUR, SUGAR, RICE, PASTA and get a matching label for each, in the same lettering, every word fitted to its label. Short words come out bigger and bolder than long ones. Choose script or capitals, and a rounded bar, an oval, or a tab with a hole to hang from a jar's neck. At 1.2 mm thick a label bends to follow a round jar, and it sticks on with thin double-sided tape or adhesive dots. At 80 mm long, twenty-four fit on a 250 mm bed. Take a label off before the jar goes in the dishwasher. Our post on pantry labels to 3D print goes into them further.

The spaghetti measure. Four holes that measure dry spaghetti for one, two, three and four people, with the family's name over them. The first hole is 24 mm across at the standard size, meant for roughly two ounces of dry spaghetti. That is close to the US FDA's reference serving for plain pasta, 55 g dry, used on nutrition labels. The hole can be made anywhere from 20 to 30 mm for bigger or smaller appetites. The holes can be named instead of numbered (LIAM, BOTH, GUESTS, PARTY), and a hole lets it hang by the hob. It is for long pasta that makes a bundle; shapes are easier with a cup or a scale.

Printing them

All three print flat, face up, with no supports. Each is two colours stacked in layers: the plate first, then the words on top after one filament change, so no multi-colour printer is needed. Two dividers fit a plate, so a set of five is three plates. They are thin, so let the bed cool before lifting them and they stay flat. For the labels, a first layer that sticks well matters for the same reason.

For sellers

Selling any of these comes with the Seller plan. Sell the dividers with a pack of blank cards as a present, and offer a family version with a relative's name on each tab. The labels sell as a standard set ready-made plus lists taken to order. The spaghetti measure pairs with a kitchen conversion chart as a new-kitchen gift for students and newly-weds.

The kitchen and baking gifts page has more for the same customers.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading