Sew-on labels for handmade items: sizes, washing and where to sew them

A practical guide to printed labels for handmade items: which shape and size suits a hat, a blanket or a soft toy, what to print crochet tags in so they survive the wash, where to sew them, and how to print a whole sheet at once.

Sew-on labels for handmade items: sizes, washing and where to sew them

Hours go into a hat or a blanket, and then it leaves the house with nothing to say who made it. Labels for handmade items fix that: a small tag sewn inside the brim or on a corner that says handmade by, and a name. Printed ones can be made a sheet at a time, in the maker's own name and colours, and that suits knitters, crocheters and sewists who make a few things a month.

One thing to know first if the maker sells: a "handmade by" tag is a nice touch, but it isn't the legal label. In Great Britain, textile products sold to the public must carry a label showing their fibre content, such as 100% wool, and Trading Standards guidance adds that it must be in English, durable, easily legible, visible and accessible, with the fibre content shown in online listings too. A printed tag can sit alongside a small fibre label, or the maker can write the fibre content on its back line. Gifts made for family don't need any of this.

This is a guide to getting the printed tags right.

What the labels are

The handmade tags are small sew-on labels with two lines: a small one (handmade by, made with love by, KNITTED BY) and a big one for the maker's name. A heart, a ball of yarn, a needle or a star can sit beside the name. They are 1 mm thin, so they sew on flat.

There are three shapes:

  • A bar with a hole at each end, like a woven label.
  • A round button with two holes side by side.
  • A heart, also with two holes.

Choosing a size

The labels go from 22 to 60 mm. The default bar is 40 mm, and on it the small line is about 3 mm tall, which a 0.4 mm nozzle prints cleanly. Below 30 mm, drop the small line and keep only the name.

As a rough guide to fitting them to the make:

  • Hats and mittens: a small round button or heart, so it sits inside a brim or on a cuff without bulk.
  • Scarves and blankets: the 40 mm bar, on a corner or near one end.
  • Soft toys and bags: a heart or a button on a seam.
  • A small brand's label: a wider bar, around 50 mm, with the brand name in a bold font.

Crochet tags that survive the wash

Printed in PETG, the tags should come through a normal warm wash and line drying: Prusa rates PETG as water resistant and fine below 80 °C. PLA softens and deforms above 60 °C, which a hot wash or a tumble dryer can reach, so use PETG for anything that will be washed, and wash a test piece before you rely on it. TPU makes a soft, flexible tag if that suits the piece better.

If you sell the piece, tell the buyer what the tag is printed in, so a PLA tag stays out of the tumble dryer.

Where to sew them

Sew through the holes with a few stitches of matching yarn or thread, as you would a button. On knitting and crochet, stitch into the fabric rather than pulling it tight, so the tag lies flat without puckering the stitches.

  • Inside the brim of a hat, at the back.
  • On a corner of a blanket, on the right side or the back.
  • On the side seam of a jumper or cardigan, near the hem.
  • On the back seam of a soft toy.

For anything given to a baby or a small child, sew the tag on firmly and put it where it can't be chewed, or leave it off: any small sewn-on part can come loose.

Printing a sheet

Makers need many of the same tag, so the design prints a sheet: twelve by default, up to forty, laid out on one plate. It prints flat, face up, with no supports, and the words are a stacked layer: one filament change when they start. Use a 0.4 mm nozzle or finer and a 0.12 or 0.16 mm layer for crisp small letters.

Kraft brown with cream, cream with brown, or the yarn's own colour with white all suit wool.

For sellers and gift buyers

On the Seller plan you can sell the sheets you print. Offer sheets of twelve and twenty-four with the buyer's name, and a few ready-made lines: handmade with love, made by Grandma. A yarn shop may stock them at the till.

As a gift for a knitter, a sheet of tags goes with a needle gauge in their name; our post on gifts for knitters to 3D print covers both. Makers who sell online can add a thank you tag to every parcel, and selling at craft fairs and markets has more for market sellers.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading