Small practical gifts to 3D print: useful things people keep using

Practical 3D printed gifts that get used every week: a trolley token for the keys, a carry handle for the shopping and a sheet of guitar picks with a name. Small, quick prints, each with the person's name, and what to print them in.

Small practical gifts to 3D print: useful things people keep using

A small gift is kept when it is useful. The promotional products trade body PPAI asked consumers why they kept items they had been given, and in its 2023 consumer study "useful" came top, at 65.4%, well ahead of liking the design. The same logic holds for a stocking filler or a Secret Santa present: something on the key ring, in the kitchen drawer or in the guitar case gets picked up every week.

For a printed gift, useful also means it has to survive real use. That rules out thin parts that snap, decides the material (PETG for anything pulled, bent or carried) and makes fit matter: a token that doesn't fit the lock or a pick of the wrong thickness goes in a drawer. The three below are small, quick prints, and each carries the person's name, so it is clearly theirs and clearly a present.

A trolley token for the keys

The trolley token keychain is a disc the size of the coin a supermarket trolley lock takes, on a handle with a ring hole. Choose a UK pound, a one euro coin or a US quarter, or set your own size for another coin. The name goes along the handle, up to twelve letters, with a star, a heart or a little trolley on the token.

Trolley locks take a coin, token or card that is returned when the trolley goes back. The handle stays outside the lock, so in most coin locks the token pulls back out once the trolley is free, and it goes home on the keys. Print it in PETG, which survives a pocket of keys better than PLA, and try the first one in a real trolley before printing more.

A handle for the shopping bags

Thin carrier bag handles cut into the fingers long before the bags are heavy. The shopping bag carry handle spreads the weight over a wide grip with finger scallops, with a hook at each end for the bags. The name, or a few words, runs along the grip.

Choose the grip by the hand: 100 mm fits most adults, 80 or 90 mm a small hand, 120 or 130 mm a large or gloved one. The thickness runs from 6 to 12 mm; the standard 8 mm with four walls suits everyday shopping, and 10 or 12 mm is better for bottles and tins. An optional hole takes a cord or a clip, so it can hang from a bag-for-life by the door. It suits grandparents who shop on foot, students in halls and anyone who walks back from the market.

Guitar picks with their name

For the guitarist, the name guitar picks come by the sheet: the standard rounded-triangle pick, about 26 by 31 mm, with a name and a small picture (a star, heart, note, bolt or skull). The lettering stands 0.3 mm out of the face, where the thumb grips, and the tip is left smooth.

Guitarists lose picks, so a sheet of twelve is one small print that gets used the same day. Pick makers grade thickness roughly as light (0.45 to 0.69 mm), medium (0.70 to 0.84 mm) and heavy (0.85 to 1.49 mm). If you don't know what they play, a medium around 0.8 mm is a safe middle; 0.6 mm is for strumming an acoustic and 1 mm and over for lead and bass. Printed picks are fine for strumming and practice and wear faster than moulded ones; PETG or nylon lasts longer than PLA. There is more in our post on custom guitar picks with a name.

Printing small, quick prints well

All three print flat, face up, with no supports. The colours are stacked layers: the piece in one colour, then a filament change where the name starts, so no multi-colour printer is needed. Small prints show every fault, so a few habits help:

  • Get the first layer right. On the trolley token, thickness is what the lock measures; on the picks, a squashed first layer leaves an edge on the tip to sand off.
  • Print the useful ones in PETG. The token and the handle are pulled, bent and carried. PETG bends before it breaks, and Prusa rates it tougher and more heat resistant than PLA.
  • Use strong contrast. A pale piece with a dark name, or the other way round, reads at a glance.

Making a set

These three sit well together. A token and a handle make a shopper's pair for a parent or grandparent. A token and a sheet of picks covers a teenager who drives and plays. Add a number plate keychain for someone with a new car.

If you sell at a stall or online, names can be made in quantity: paste one per line into a bulk order and each piece comes out with its own name. Bulk orders and the right to sell the prints come with the Seller plan.

For more small presents, the stocking fillers page has the rest of the list.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading