Tooth fairy ideas to 3D print: a tooth fairy dish, a fairy door and a coin of their own

Three tooth fairy ideas with the child's name on them: a tooth fairy dish for the bedside table in place of the pillow, a fairy door on the skirting board for her to come through, and a coin of the family's own for the first tooth. What each one is and how it prints.

Tooth fairy ideas to 3D print: a tooth fairy dish, a fairy door and a coin of their own

What to know first

Children usually have 20 baby teeth, and the American Dental Association's eruption chart shows them being shed over several years: the front incisors at about 6 to 7, the canines and back molars as late as 10 to 12. So the tooth fairy is not a one-night event but a visit that comes back many times over about six years.

The custom itself is simple. In the tooth fairy folklore of Western countries, the child puts the lost tooth under the pillow or on the bedside table, and the fairy swaps it for a small payment overnight; in Spain and Latin America the visitor is a mouse, El Ratón Pérez. Families add their own touches: a note, a sprinkle of glitter, a door for the fairy.

The practical problem is the pillow: a tiny tooth gets lost in the bed, and swapping it means reaching under a sleeping head. A dish on the bedside table solves that. Coins and other small things left out are a choking risk for any toddler in the house, and the NHS lists coins among the small objects to keep out of a baby's reach.

Here are three pieces that work together: a dish in place of the pillow, a door for the fairy to come in by, and a coin of the family's own to leave behind.

A tooth fairy dish in place of the pillow

A tooth under a pillow gets lost, and finding it means reaching under a sleeping head. The tooth fairy tray sits on the bedside table instead. It is shaped like a tooth, with the child's name across the top and two dishes under it: one for the tooth, one beside it where the coin is found in the morning.

The dishes are a little over 2 mm deep, enough to stop a tooth rolling off when the tray is carried. The coin's dish is sized for the coin you choose: a pound, a euro, a quarter or a dollar coin, each made a little wider than the coin itself. For any other coin, or a folded note, choose My own size and enter the width you need.

A line of your own words goes under the dishes. The tray is 80 to 150 mm across, and the name can be in English or Hindi.

With twenty baby teeth to come out, the tray gets used for years and can pass down to a younger brother or sister.

A fairy door for her to come through

The fairy door is a little arched door of planks with strap hinges, a knob and a frame, and the child's name on a plaque over it. The window takes a star, a heart or a round pane, and a step can sit under it. It is 50 to 120 mm wide; at 70 mm wide the door is about 115 mm tall, which suits a skirting board.

The door doesn't open. It is one flat piece that sticks to the wall with double-sided tape or reusable putty on its back. Put it just above the floor near the bed, and the tray on the table becomes where the fairy was heading.

The same door does a second job in December. Change the name to Elf Door and add a wreath, and it is the elf's way in. Our post on the elf door and fairy door covers that side of it.

A first tooth present: a coin of their own

The fairy leaves something in the coin dish. Some families leave money; others leave something the child can only get from the fairy. Reward coins are a sheet of coins with a name round the top, a line of your own round the bottom, and a big number in the middle, with a star, a heart, a crown or a smile under it.

They are 26 to 60 mm across, up to forty to a sheet, and thick enough to pick up and clink in a jar. Put the child's name round the edge and a line such as a message from the fairy round the bottom. If you size the tray's coin dish with My own size, enter the width of the coin you printed and check the preview.

The rest of the sheet carries on as the family's money for jobs and kind acts, spent on screen time or a pick from the prize box. More in our post on reward coins for kids and classrooms.

Printing them

All three print flat, face up, with no supports. The colours are stacked layers with one filament change, so a single-spool printer is all you need.

  • Tray: change filament when the name starts. White or cream with pale blue or pink on top suits a tooth.
  • Door: change filament when the details start. Pink or purple with white for a fairy. Use PETG and 100 mm or more for a door on a garden tree.
  • Coins: change filament when the numbers start. Gold with a dark number looks like treasure.

Selling them

Teeth don't keep to a season, so the tray can stay listed all year. Sell it with a fairy door in the same name, and offer a few coins as an add-on. A dental practice might want trays for goody bags: leave the name empty or put the practice's name on, and print them in batches. Selling the prints needs the Seller plan.

For more pieces for a child's room, see the children's rooms and learning page.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading