An ultrasound picture frame to 3D print: the baby's scans as a timeline of photo magnets

A sonogram frame that grows with the pregnancy: each scan as a photo magnet in its own pocket, its week on a line of hearts under it, the baby's name across the top and the due date on the plinth. What to write, which magnets to order and how to print it.

An ultrasound picture frame to 3D print: the baby's scans as a timeline of photo magnets

A scan usually comes home as a small printed picture. It gets shown round the table, stuck to the fridge, and then put in a drawer. Many scan prints are on heat-sensitive paper, and thermal paper is known for fading over time, so a copy as a photo print or magnet keeps better.

Which scans, and when

How many scans a pregnancy has depends on the country and on the pregnancy. In England, the NHS page on ultrasound scans in pregnancy says hospitals offer at least two: the dating scan at 11 to 14 weeks, usually called the 12-week scan, and the screening scan between 18 and 21 weeks, called the 20-week or anomaly scan. Some parents have more, for medical reasons or privately.

So a display for the whole pregnancy has to cope with a number of scans nobody knows at the start, and with weeks that differ from family to family. Ask the parents which they have had and which they expect.

Some families share pregnancy news at Christmas, which makes December one good time to give the scans somewhere to live. Not one ultrasound picture frame for one picture, but a display that holds them all, in order, with the weeks under them.

What it is

The scan timeline stand is a print file for a board with a row of pockets, one for each scan. Each scan goes in as a square photo magnet, held by a small round magnet glued into the floor of its pocket.

Under the pockets a line runs the width of the board, with a heart at each scan and its week under the heart: 8 WEEKS, 12 WEEKS, 20 WEEKS, 32 WEEKS. The baby's name goes across the top in script, and the due date runs along the plinth the board stands in. It reads like the pregnancy itself, from the first grainy shape to the face at thirty-two weeks.

It takes two to eight scans. Out of the box it says Baby Johnson across the top, has four pockets with those four weeks, and DUE JUNE 2027 on the plinth.

Remember that it is a file, not a finished frame. You customise it in the browser, download it and print it yourself, or have someone with a printer make it for you.

Wording for the weeks and the name

There are three boxes of words, and all of them are short.

  • The scan weeks. One label per scan, in order, separated by commas: 8 WEEKS, 12 WEEKS, 20 WEEKS. The number of labels sets the number of pockets, so typing six labels gives you six pockets.
  • The name. It goes across the top in script, up to 18 letters. Baby Johnson works before the name is chosen, or before it is shared. The Johnson Twins works for two. Once the name is settled, Olivia or Noah can go on its own.
  • The due date. Along the plinth, up to 28 letters: DUE JUNE 2027, or DUE MARCH 2027. Leave it empty to drop it.

The script for the name can be Dancing Script, Pacifico or Lobster, or Outfit Bold or Big Shoulders Bold for a plainer look. The weeks and the due date have their own smaller font. The marks on the line can be hearts, stars, dots or little footprints. Stars suit twins well, and footprints go nicely with Pacifico.

When the scans have not all happened yet

This is the part that makes it work as a Christmas present. If the news is shared in December, the parents may only have one or two scans so far. Type in the weeks you expect anyway. The empty pockets wait for the next appointment, and each new photo magnet clicks in when it comes home.

A stand under the tree with one scan in it and three empty pockets with 20 WEEKS, 28 WEEKS and 36 WEEKS under them says quite a lot about the year ahead.

Which photo magnet size to order

The photo magnets are not part of the print. Order them from a photo magnet shop, from the scan images the parents already have. The pockets take square photo magnets in the sizes those shops print:

  • 2 x 2 inches
  • 2.5 x 2.5 inches
  • 3 x 3 inches
  • 50 x 50 mm

Pick the size in the studio before you download. Four fit in a row at 2 inches. With more scans, or with bigger photos, the board goes to two rows, so six scans at 2.5 inches come out as two rows of three. If a set would be too tall for a 250 mm bed, the file stops with a message saying so, and smaller photos fix it.

Each pocket leaves a little room round the photo. If yours are a touch bigger than they should be, raise the fit setting. The pockets are shallow, about right for a photo magnet that is around 1 mm thick.

How it stands

The board's lower edge sits in a slot along the plinth, which leans it back a little: 10 degrees by default, adjustable from upright to 16 degrees. The due date runs along the top of the plinth in front of the board. Board and plinth fit together without glue.

The only glue is a drop for each small round magnet in the pockets. They are 10 x 2 mm by default; set the size to match the magnets you have. Glue them in all the same way up, so every photo magnet sticks.

Printing notes

  • Two pieces, two colours. The board and the plinth are the base colour; the name, the line, the hearts and the weeks are the second. The colours are stacked in layers, so you change filament once on each plate: on the board when the line and the words start, on the plinth when the date starts. No AMS is needed.
  • Flat, no supports. The board prints face up. The plinth prints on a plate of its own.
  • The fit. If the board is loose or tight in the plinth, change the slot clearance and reprint the plinth only.
  • Colours. A soft base with a deeper colour for the words reads well from across a room. Match the nursery if the parents have already picked a scheme.

Another stand, and what comes after

If you want one stand that can change with the photos, the photo magnet stand holds up to four photo magnets across and three down, with a topper that plugs into the top edge and swaps out. It says Oh Baby over the scans this month and Merry Christmas over the family photos in December, with the spare toppers printed alongside. It is a good fit for grandparents-to-be who want the scans on their own shelf.

Once the baby is here, the birth story stand carries the story on: a big initial at the back, the baby's name in script in front of it, and the date, time, weight and length along the plinth. The new baby gifts page has the rest.

For more on telling the family, our post on a Christmas pregnancy announcement for the grandparents covers a stencil they trace to find the news. Baby shower gifts to 3D print and new baby birth stats keepsakes cover the months either side.

Selling scan timeline stands

Selling the prints is covered by the Seller plan. The obvious set is the stand with the scan magnets themselves, as a baby shower present or a Christmas gift for expecting parents. If you already print photo magnets, the stand gives your customers somewhere to put them. Private scan studios that sell scan photos may also be interested.

Ask for the weeks, the name and the due date in one message, and send a picture of the finished layout before you print. Then offer the photo magnet stand as a second piece for the grandparents, with a Merry Christmas topper for December.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading