Will return clock signs for shop doors: BACK AT and a time you set

A will return clock sign for the door of a shop run by one person: BACK AT over a clock whose hands you turn to the time you will be back, and the shop's name under it. How the hands work, how it hangs on glass, what else it says, and how to sell it to the shops on your street.

Will return clock signs for shop doors: BACK AT and a time you set

Most businesses are small, and many are run by one person. In the UK, the government's business population estimates for 2025 counted about 5.7 million private sector businesses, of which 4.3 million (75%) employed nobody but their owners. When the only person in a shop goes to the bank, collects the children or has lunch, the door shuts.

What a "back soon" sign has to say

"Back in 5 minutes" tells a customer very little, because they don't know when it was put up. A sign that gives the time of return does: BACK AT, and a clock set to half past two. Someone standing at the door can see whether to wait or come back later. Two other details help:

  • A way to get in touch. A phone number or the shop's name along the bottom, for the customer who can't wait.
  • Easy to put up and take down. It goes up several times a day, so it should hang in a second. On a glass door, a suction cup works because glass is smooth and non-porous.

For a shop with one person in it, a back at sign for the shop door is the sign that goes up every time they step out.

What the sign is

The back at clock sign is a flat sign with a heading at the top, BACK AT by default, a clock face with its hours under it, and a line along the bottom for the shop's name or a phone number. It is 130 to 220 mm wide, with two holes at the top for a cord or a hook.

The clock has two hands, an hour hand and a minute hand, that turn on a pin. They are stiff enough to stay where you set them and loose enough to turn with a finger. Before leaving, the owner turns them to the time they will be back, hangs the sign on the door and goes.

How the hands go on

The hands, the pin and a cap are separate small pieces. The pin goes through the sign from the back, the short hand drops on, then the long hand, and the cap presses on at the front. The pin's head sits in a recess in the back of the sign, so it still lies flat against the glass.

If the cap is loose or the hands are stiff on your printer, change the clearance and reprint the small pieces. The sign itself does not need printing again.

A back at sign for a shop door made of glass

Many shop doors are glass. Hang the sign on a cord from a suction hook through the two holes at the top. It sits inside the glass, reads from the pavement and comes down in a second when the owner is back.

Other words for the top

BACK AT is the default, and the heading can be changed. Some that work:

  • AT LUNCH UNTIL, with a phone number along the bottom, for a clinic or a reception.
  • OPEN AGAIN AT, for a stall that shuts in the middle of the day.
  • ASLEEP UNTIL, on a narrower sign, for a teenager's bedroom door. It works as a present as well as a shop sign.

Studios, workshops, office doors and market stalls all have the same problem as the corner shop: a door that is sometimes shut for a while, and visitors who want to know how long.

Printing it

It needs three colours. The sign prints flat, face up, with no supports, and its lettering and the hours are stacked layers on top after one filament change. No multi-colour printer is needed. The hands, the pin and the cap print separately in a third colour, which should stand out from the face; a bright colour reads from further away.

The pin prints standing up. Let it cool before you press the cap on. No glue is needed anywhere.

Selling it with the rest of the door

A shop door usually carries two things: the hours and a sign for when nobody is in. The design page suggests selling the clock sign with an opening hours plate in the same two colours, so the door looks as if it was planned. Our post on opening hours signs for shop doors covers setting out the week and selling that plate.

Inside, the counter needs a counter bell plate: the bell sits in a raised ring with PLEASE RING over it and FOR SERVICE under it, or the shop's name beside it on the long plate. A set of three in the shop's colours, door and counter together, is a simple thing to show an owner.

The approach is the same as for any walk-in sale. Make one with the shop's name along the bottom, take it in and hang it on their door. Selling them is allowed on the Seller plan. The shops and market stalls ideas page has more for the same customers.

Planning what to make next? Browse personalised print ideas by occasion, or work out prices, party orders and colour changes with the free maker tools.

Take your next custom order in minutes

Type your customer's text, send them a picture to approve, download a print-ready file.

Start selling

Keep reading