# Peg rail for carded die-cast cars, with a title

> A wall rail for die-cast cars that stay in their packets. Each card hangs by its own slot on a flat peg, as it did in the shop, under a title, and rail joins rail along the wall.

Web page: https://stlmint.app/designs/carded-car-peg-rail

Personalise it in the studio: https://stlmint.app/app?p=carded-car-peg-rail

## Details

- Category: [Toys and activities](https://stlmint.app/designs/toys-and-activities.md)
- Price: $4 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 236 × 46 × 18 mm (23.6 × 4.6 cm) with the example text
- You type: Title, Cards, Peg length, Fixing, Lettering, plus 6 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. One Strike (one piece): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- Cards hang by their own slot on a flat peg: nothing clamps or bends the card
- A title along the top, above the cards
- One or two cards a rail; a jigsaw knob joins the next rail for any length
- Pegs lean up 15 degrees so a card can't slide off
- Peg length 10 to 100 mm: one car, or two or three one behind the other
- Two screws the cards hide, or mounting tape
- One piece, printed flat with no supports; the pegs come out in the title's colour

## Good for

- Collectors' walls
- Treasure hunts and premiums
- Games rooms
- Shop displays
- Gifts for collectors

## For the cars that stay in the packet

Some cars are never opened, and a shelf or a clip frame is hard on the card. This rail hangs each one the way the shop did: by the slot at the top of its card, on a flat peg that leans up towards the wall.

A title runs along the top, above the cards: the series, the year, or whose wall it is.

## Along the wall

One rail holds one or two cards. A knob on its right end presses into the next rail's left end, so the row runs on as long as the collection does. Only the first rail needs a title; the rest can be low, plain rails.

## Printing tips

- Print flat, pegs up, with no supports.
- One filament change when the rail is finished.
- The Bambu 3MF prints it at the sturdy setting: four walls and 25% gyroid infill. Use the same for an STL.

## Selling tips

Sell it to collectors by the row: a titled rail and three plain ones hold eight cards. For loose cars there is the [toy car garage wall](/designs/toy-car-garage-wall).

## Questions about the carded car peg rail

### Which packets does it take?

Any carded car with a hang slot at the top of the card. The pegs are 112 mm apart by default, for standard cards about 108 mm wide; set the spacing wider, up to 120 mm, for wider cards. The peg is a flat blade 10 mm wide and 4 mm thick: hold a card's slot against those sizes before printing a wall of rails.

### How do the rails join?

Each rail has a jigsaw knob on its right end and a socket on its left. Put the first rail up, then press the next one's socket over the knob and fix it. If it is tight, raise the fit setting.

### How far apart do the rows go?

A standard card is about 165 mm tall. Put the next row of rails 180 to 190 mm below the first, so each title shows above its cards.

### Will it damage the card?

It holds the card the way a shop peg does, by the slot made for it, so the corners and edges touch nothing. Don't overload a long peg: three cars deep is plenty.

### How does it print?

Flat on its back with the pegs standing up, no supports. Change filament once when the rail is done; the title and the pegs print in the second colour. The Bambu 3MF prints it at the sturdy setting (four walls, 25% gyroid infill), which makes the pegs solid. For an STL use the same.

### Can I sell it?

Yes, on the Seller plan. Sell a titled rail with plain rails as add-ons, in the buyer's colours.

## Sellers also offer

- [Toy Car Garage Wall](https://stlmint.app/designs/toy-car-garage-wall.md): Garage bays for 1:64 die-cast cars with dovetails on all four sides: slide block onto block and build a wall of cars, under a sign with a name. ($4 a file, 2 colours)
- [Starting Grid Car Plinth](https://stlmint.app/designs/starting-grid-car-plinth.md): A plinth for one die-cast car in a painted grid box, with a grid position, the car's name and a second line. Plinths join side to side into a starting grid. ($4 a file, 2 colours)
- [Toy Car Park Levels](https://stlmint.app/designs/toy-car-park-levels.md): A multi-storey car park for 1:64 die-cast cars: decks with numbered bays that stack on press-in posts, level on level, under a sign with a name. ($4 a file, 3 colours)
