# Caster wheel cups sized to the wheel

> Keeps a bed, sofa, piano, office chair or trolley where you put it and protects the floor. A round dish for swivel and twin-wheel casters, or a trough for a fixed wheel so it can't roll out the ends. Sized to the wheel, with a lift if you want one.

Web page: https://stlmint.app/designs/caster-wheel-cups

Personalise it in the studio: https://stlmint.app/app?p=caster-wheel-cups

## Details

- Category: [Furniture risers and fixes](https://stlmint.app/designs/furniture-fixes.md)
- Price: $3 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 132 × 132 × 10 mm (13.2 × 13.2 cm) with the example text
- You type: Wheel, Seat width, Lift, Rim, How many, plus 3 more options for fine-tuning
- Files: STL for any slicer, plus a Bambu Studio project
- Printing: Fine (one colour): Prints in a single filament: any printer, no changes. One Strike (4 pieces, each ready to use): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- A round dish for swivel and twin-wheel casters, 20 to 100 mm across
- Or a trough for a fixed wheel, up to 150 mm long, so it can't roll out the ends
- The seat's depth from 2 to 15 mm, the dish curved like the wheel
- A lift under the seat, from 3 to 60 mm, to raise the furniture as well
- A wide bevelled rim, smooth or ribbed for grip when you slide it under
- One, two or four on a plate, in one colour, no supports

## Good for

- Beds on castors
- Pianos
- Office chairs on hard floors
- Kitchen trolleys
- Sofas and armchairs on wheels

## Wheels that stay put

Beds creep across the room, office chairs roll away and pianos leave dents. A cup under each wheel stops it moving and spreads the load over a wider foot.

The seat is shaped like the wheel: a round dish curved to sit a swivel caster in the middle, or a long trough for a fixed wheel, closed at both ends. Set its size to the wheel and its depth to how firmly it should hold.

## Rims

- **Ribbed**: grooves round the outside to grip with your fingers while you lift the furniture onto it.
- **Smooth**: a plain bevelled rim, for a quieter look.

## Printing tips

- Print flat, seat up, with no supports.
- The Bambu 3MF prints at the load setting: six walls, six top and bottom layers, 40% gyroid infill. Use the same for an STL.
- Stick felt or rubber pads underneath for wooden floors.

## Selling tips

Sell them in fours sized to the customer's casters, in the colour of the floor or the furniture. They go with [furniture leg risers](/designs/furniture-leg-riser) and [leveller cups](/designs/leg-leveller-cups) as a furniture fixes range.

## Questions about the caster wheel cups

### Dish or trough?

A swivel caster turns and needs a round dish; a twin-wheel office chair caster sits in one too. A fixed wheel, as under many beds and pianos, rolls in one direction only: a trough lets it settle in the middle and stops it rolling out of either end.

### How big should the seat be?

Look at the wheel's footprint from below. For a dish, make it a little wider than the wheel (or both wheels of a twin caster) is long where it touches; for a trough, a little wider than the wheel is thick. 45 mm suits most chair and bed casters. Deeper seats hold a wheel more firmly.

### Can it raise the furniture too?

Yes. The lift is the solid floor under the seat; set it higher to raise a bed or a sofa on wheels.

### How should I print it?

Flat, seat up, with no supports. The Bambu 3MF prints it at the load setting (six walls, six top and bottom layers, 40% gyroid infill); for an STL use the same. Add felt or rubber pads underneath for wooden floors.

### Can I sell it?

Yes, on the Seller plan. Sell sets of four in the floor's or the furniture's colour.

## Ideas for selling it

- [Personalised housewarming gifts to 3D print and sell](https://stlmint.app/ideas/housewarming-gifts.md)

## Sellers also offer

- [Furniture Leg Riser](https://stlmint.app/designs/furniture-leg-riser.md): Lifts a sofa, bed or table by its legs: each leg stands in a pocket cut to its own size, round, square, rectangular or splayed. ($4 a file)
- [Leg Leveller Cups](https://stlmint.app/designs/leg-leveller-cups.md): Stops a table or cabinet rocking: a set of cups, each with its own lift for the gap under its leg, numbered so they go back in the right place. ($4 a file)
- [Name Keychain](https://stlmint.app/designs/name-keychain.md): A name in flowing script, ready for your keys. ($3 a file, 2 colours)
