# Click-wheel surprise stencil

> The surprise stencil in a round ring: a spring tooth clicks into a notch at every stop, so the hidden picture comes out clean even when small hands rush. A tab to hold it down asks what they will draw.

Web page: https://stlmint.app/designs/click-wheel-surprise-stencil

Personalise it in the studio: https://stlmint.app/app?p=click-wheel-surprise-stencil

## Details

- Category: [Toys and activities](https://stlmint.app/designs/toys-and-activities.md)
- Price: $4 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 141 × 166 × 3 mm (14.1 × 16.6 cm) with the example text
- You type: Hidden picture, On the tab, plus 20 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. One Strike (one piece): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- A spring arm in the ring with a tooth that drops into a notch at every stop: turn until it clicks, and the disc is exactly in place
- The disc prints in place in its ring, the tooth already sitting in notch 1
- Seventeen hidden pictures of our own, from a cat or a rocket to a pram or a plane; nobody can tell which from the slots
- A tab below the ring to hold it down with one hand while the other turns the disc, with the name on it
- Slot numbers turn to read upright at their own stop
- Two colours, one filament change, flat with no supports; about 141 x 168 mm

## Good for

- Younger children
- Party bags
- Stocking fillers
- Classrooms
- Travel

## Turn until it clicks

This is the surprise drawing stencil for hands that are still learning to be careful: nobody knows what they are drawing until the end, and the click makes sure the end looks right. The disc sits in a round ring, and a spring arm in the top of the ring carries a small tooth that drops into a notch on the disc's edge at every stop. Turn until it clicks, trace every slot with that number, turn to the next click. Because each stop is exact, the short lines on the paper meet end to end and the hidden picture comes out clean, even when the disc gets turned in a hurry to find out what it is.

The ring has a tab below it: one hand holds the tab flat on the paper while the other turns the disc. The child's name goes on the tab with a short line saying how it works. The slots and their numbers are laid out for every order, and Another arrangement gives the same picture a new scramble.

## Printing tips

- The spring and the tooth print in place: the tooth sits in the first notch with 0.35 mm all round it (Tooth fit), and the disc in the ring with 0.5 mm (Fit). Turn the disc gently the first time to free them.
- Two walls fill the 1.8 mm spring arm solid. Avoid ironing the top layer, which can bridge the gap behind the arm.
- Two colours stacked, one filament change.

## Selling tips

Offer it alongside the square stencil as the version for under-sevens. Show it mid-drawing, with half a picture nobody can name yet; a short video of the clicks and the picture appearing sells it better than any still.

## Questions about the click-wheel surprise stencil

### What does the click do?

A thin arm in the ring flexes outwards as the disc turns and its tooth drops into the next notch. At every stop the disc sits in exactly the same place, so the lines traced at stop 3 meet the ones from stop 2 without a gap. It also tells a child they have reached the next number without looking.

### Will the spring break?

It bends about a millimetre, a small fraction of what PLA takes, and it bends in the plane of the print, along the layers, which is the strong way. The default two walls fill the 1.8 mm arm solid; do not drop below that.

### How is it different from the square stencil?

The square frame is lined up by eye with a pointer and has a wide name band; the click wheel is round, lines itself up, and has a tab to hold. Pick the click wheel for younger children or for pictures with lots of small joins.

### It turns stiffly. What do I change?

If the disc rubs on the ring, raise Fit in All options to 0.6 or 0.7 mm. If the tooth prints stuck in its notch or the clicks are too stiff, raise Tooth fit from 0.35 to 0.45 or 0.5 mm. Check that the first layer has no elephant's foot.

## Sellers also offer

- [Surprise Drawing Stencil](https://stlmint.app/designs/surprise-drawing-stencil.md): Nobody knows what they are drawing: the disc is just numbered scraps until the last stop, when the picture appears. The child's name on the frame. ($4 a file, 2 colours)
- [Surprise Name Stencil](https://stlmint.app/designs/surprise-name-stencil.md): Trace the numbered scraps and a word appears in outline letters: the child's own name, or a short surprise like BABY or YES? ($4 a file, 2 colours)
- [Your Own Surprise Stencil](https://stlmint.app/designs/own-surprise-stencil.md): Hide your own drawing in a stencil: upload a simple SVG and whoever traces it only finds out what it is at the last stop. ($5 a file, 2 colours)
