Digital 3D print fileDownloads as STL3MF

Collar slide pet ID tag

A flat ID tag that the collar threads through, so nothing dangles, jingles or snags. The slots are sized to the collar width you enter.

What you download

  • collar-slide-pet-id-tag-MILO.stlFor any slicer and any 3D printer
  • collar-slide-pet-id-tag-MILO.3mfA Bambu Studio project with the colours set

Digital files only. Nothing is posted: you print it yourself, for you or for your customers.

Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence

Size
About 66 × 28 × 4 mm (6.6 × 2.8 cm) with the example text
You type
Pet's name, Phone number, Collar width (mm), Icon, Lettering, plus 5 more options for fine-tuning
Colours
2 parts (base, text), so it prints in 2 colours or as one
Files
STL for any slicer, plus a two-colour Bambu Studio project

Why sellers like it

  • The collar threads through two slots: no ring to lose
  • Slots sized to collar widths from 10 to 32 mm
  • Name and phone number, with an optional icon
  • Prints flat in two colours with no supports

No ring, no jingle

Some owners take the tag off because it rattles against the bowl at night, or because it catches on brambles and fences. The slide tag fixes both: the collar threads through it, so it sits flat against the collar and does not move.

Enter the collar width and the slots are cut to fit. The name and phone number sit between the slots, where the tag faces out.

Selling tips

  • Ask for the collar width on the order form; most customers do not know it, so suggest they measure it with a ruler.
  • Cat owners are a good market: small, light and silent suits a cat collar.

Questions about the collar slide pet id tag

How do I size it?

Measure the width of the collar, not its length, and enter it under Collar width. The slots come out 1.5 mm longer, so the collar slides through without forcing. Widths from 10 to 32 mm fit; the tag grows taller with the collar.

How does it go on?

Thread the collar in through one slot from the front, behind the tag, and out through the other slot. The tag then sits flat on the outside of the collar with the name showing. Take the collar off to do it; a buckle will not go through the slots.

What should I print it in?

PETG, at 3 mm thick (the default for this tag). It bends a little as the collar flexes, which PETG takes better than PLA.

Will a printed tag last?

PETG holds up to everyday wear, but plastic wears faster than metal. Tell the customer to check the tag every few weeks and replace it when the lettering wears down. For a dog that chews its tags or works outdoors, a metal tag is the safer choice.

Is a name and phone number enough for a dog tag?

It is what a finder needs, but some places ask for more. In the UK, for example, a dog in a public place must wear the owner's name and address. Check the rule where your customer lives and put the extra words on a second tag, or on the round tag's top line.

Can I print it in two colours?

Yes. The tag and the raised lettering are separate parts in the Bambu Studio project, so change filament at the top of the tag or let the AMS do it. The STL prints in one colour too.

Can I sell tags made from this file?

Yes, on the Seller plan you can print and sell as many as you like through any channel.

Ideas for selling it

More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.

Sellers also offer

Start selling the collar slide pet id tag

Type your customer's text, send them the picture, download the print file.

Personalise this design

Early Black Fridaythrough Nov 30 (US Pacific time)

The Seller plan at $12 $6 a month

For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.

Get the Seller plan