Digital 3D print fileDownloads as STL3MF
Growth chart ruler in press-together sections
A height chart made like a giant ruler, with a tick for every centimetre and the child's name up it. It prints in sections that press together with dovetails, goes up as one long ruler and comes down again to move house with the family, marks and all.
- Clad 2 colours, 2 filament swaps across 2 platesColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 7 pieces on 2 platesPrints as pieces that slot or press together; the studio shows it assembled.
What you download
growth-chart-ruler-Emma.stlFor any slicer and any 3D printergrowth-chart-ruler-Emma.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 171 × 1049 × 4 mm (17.1 × 104.9 cm) with the example text
- You type
- Name, Small words, Units, Lowest mark (cm), Sections, Markers (comma separated), plus 7 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- A tick for every centimetre and a figure every ten; or feet and inches
- The child's name runs up the ruler, across the joints
- Two to seven sections of 20 cm each: 40 cm to 1.4 m of scale
- Sections join flat with press-in dovetails, no glue
- Arrow markers for each birthday; print more later with markers only
- Comes off the wall and moves house with the family
Pencil marks you can keep
Every family measures its children against a door frame, and then moves house. A growth chart that hangs on the wall keeps the marks: one arrow per birthday, with the age and the year, beside a scale that reads like a giant school ruler.
A ruler in sections
No printer is a metre tall, so the ruler prints in 20 cm sections that press together with dovetails. The ticks, the figures and the child's name carry on across the joints, with only the seam between them.
Printing tips
- Print each section along the bed, face up; change filament when the scale starts.
- The dovetails carry the whole ruler, so the Bambu 3MF prints it at four walls and 25% gyroid infill; set the same for the STL.
- White or cream with dark figures reads like a ruler. A wood-coloured filament with white figures looks like the classic wooden chart.
- Press the sections together on the floor, then hang the whole ruler.
Selling tips
Ask for the name, the units and how tall a chart they want. Sell the first set of markers with it and offer a new one each birthday. For the same child's room, add a kids' door plaque.
Questions about the growth chart ruler
How do I hang it at the right height?
The lowest mark is the number you choose, 60 cm by default; in feet and inches it rounds to the nearest 4 inches, so 60 cm starts the scale at 2 feet. Measure that height up from the floor, make a pencil mark, and hang the ruler so its lowest tick is on it. A hole in the head takes a nail or a screw, and a second hole near the foot stops it swinging.
How accurate is it?
The ticks are exact in the file, and a tuned printer holds them to about a millimetre over a section. Check the first section against a tape measure; if it is out, correct the scale along that axis in your slicer.
How do the sections join?
Each section has two dovetails on its top edge that press down into sockets in the next. Lay them face up on the floor and press them together. The scale and the name carry on across each joint.
How do the markers work?
Each marker is an arrow with a line of words: an age and a year, or a name and a date. Stick it beside the scale with a dot of reusable putty or double-sided tape, pointing at the child's height. Print more with Markers only whenever there is a birthday.
Why not just mark the door frame?
Because you can't take the door frame with you. This comes off the wall with every mark on it.
How many plates is it?
Three 70 mm sections fit a 256 mm bed, so five sections are two plates, and the markers share the second.
Can I sell it?
Yes, on the Seller plan. It sells as a first-birthday and christening present; offer a set of markers each year.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the growth chart ruler
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.