Digital 3D print fileDownloads as STL3MF
Ivy initial bookends: two letters with ivy climbing across them, names on the plates
A pair of bookends, each a thick initial with an ivy vine climbing across it from its plinth. Each letter slides into a slot in a plate that goes under the end book, and a name or a word is raised on the plate's front ledge.
- Clad 2 colours, 2 filament swaps across 2 platesColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 4 pieces on 2 platesPrints as pieces that slot or press together; the studio shows it assembled.
What you download
ivy-initial-bookends-L.stlFor any slicer and any 3D printerivy-initial-bookends-L.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 300 × 153 × 142 mm (30.0 × 15.3 cm) with the example text
- You type
- Left initial, Left name, Right initial, Right name, plus 8 more options for fine-tuning
- Colours
- 2 parts (base, ivy), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Two thick initials with ivy climbing across them, the vines mirrored so the pair frames the row
- Each letter slides into a slot along the front of its plate; the books' weight holds it up
- A name or a word on each plate's front ledge
- Two children's initials, a couple's, or one bookend on its own
- Letters 90 to 170 mm tall, plates 70 to 150 mm deep under the books
- No glue, no supports; two colours stacked in layers, no AMS
Ivy on the bookshelf
Two thick initials standing at the ends of a row of books, each with an ivy vine climbing across it from the plinth it stands on. The vines are mirrored, so they climb out to the far top corners and the pair frames the books between them.
Each letter slides into a slot along the front of a plate, and the plate goes under the end book, so the books themselves hold it up. The front ledge of each plate carries a name or a word: two children's names, a couple's names, or "Once upon" and "a time".
Printing tips
- Deep green letters with pale ivy, or cream letters with green ivy, suit wooden shelves.
- The letters fit side by side on one plate and the two bases on another.
- Use the sturdy setting or 4 walls: a bookend takes a sideways push.
Selling tips
A good present for a new reader, a wedding (the couple's initials), or a teacher's classroom shelf. Sell the pair with a matching meadow initial block for a nursery set.
Questions about the ivy initial bookends
What can I change?
Each bookend's initial and the name or word on its plate, the fonts, the letters' height and thickness, how far the plates reach back under the books, the fit in the slot, and whether to make a pair or just one.
How do they hold the books up?
The letter's plinth slides into a slot along the front of a plate, and the plate goes under the end book. The books' own weight keeps the plate down and the letter upright. Nothing is glued, so they come apart flat for moving.
How should I print them?
The letters lie flat, face up, on one plate, and the bases on another, all with no supports. Swap filament where the ivy and the names begin. The Bambu 3MF prints them at the sturdy setting (4 walls and 25% gyroid infill); for an STL use the same.
My letter is loose or tight in its slot.
Change the fit: more clearance if it won't go in, less if it wobbles. 0.25 mm suits most printers.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the ivy initial bookends
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.