Digital 3D print fileDownloads as STL3MF
Logo embosser for kraft bags and cards
Two plates that press a shop's name up out of kraft bags, card, tags and letter paper, with no ink. Pegs line the plates up, so every bag is embossed in the same place.
- Fine One colourPrints in a single filament: any printer, no changes.
- One Strike 2 pieces, each ready to useComes off the plate ready to use, with nothing to put together.
What you download
logo-embosser-MAPLE-CO.stlFor any slicer and any 3D printerlogo-embosser-MAPLE-CO.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 64 × 101 × 8 mm (6.4 × 10.1 cm) with the example text
- You type
- Name, Second line, Shape, Paper, plus 9 more options for fine-tuning
- Files
- STL for any slicer, plus a Bambu Studio project
Why sellers like it
- Presses the name up out of the paper: no ink, no pad, nothing to wipe
- The raised plate reads the right way round; the counter plate is its mirror, with room round every letter for the paper
- Two pegs and two holes line the plates up every time
- Slip the counter plate inside a bag, with the pegs over its top edge, to emboss the front
- Kraft paper, card stock or heavy card: the counter plate is made for the paper you choose
- Two flat plates in one colour, faces up, no supports
Branding without ink
A raised name on a kraft bag or a thank-you card looks expensive, and it costs nothing per bag. There is no pad to dry out and no ink on anyone's fingers: the plates squeeze the paper into shape.
The raised plate carries the name, a second line and a frame. The counter plate has all of it sunk in, mirrored, with a little room round each letter for the paper to fold into. Two pegs on one edge drop into two holes on the other, so the name lands in the same place every time.
Printing tips
- Print both plates face up at 0.12 to 0.16 mm layers for crisp edges.
- Bold fonts emboss best. Pick the paper setting you will really use.
- PETG is tougher under a vise than PLA, but both work.
Selling tips
Sell the plates with a small rubber mallet as a branding kit for home bakers and online sellers. A second set with a different name is a quick reprint.
How to use it
- Lay the counter plate face up on a table, or slip it inside the bag.
- Slide the paper over it, up to the pegs' edge.
- Turn the raised plate face down and drop its pegs into the holes.
- Squeeze the plates in a vise, or give the top a few firm blows with a rubber mallet.
- Lift the raised plate off and peel the paper away.
Questions about the logo embosser
Does a printed embosser really work?
Yes. Paper and thin card take a crisp raised print from PLA or PETG plates, as long as the plates are squeezed hard and evenly. A bench vise is best; a rubber mallet works on a firm table.
Why is the name backwards on one plate?
The counter plate is the mirror of the raised plate, because the raised plate turns over onto it. The name reads the right way on the raised side of the paper.
Which paper setting should I pick?
Kraft or printer paper for bags and thin paper, card stock for tags and cards, heavy card for thick card or thin leather. It sets how much room the counter plate leaves round each letter.
How small can the lettering be?
Bold letters about 4 mm tall and up emboss cleanly. Fine scripts need to be larger; give a script name the whole plate.
Can I emboss the middle of a bag?
The pegs sit along one edge, so the embossing goes as far from an edge as the plate is tall. Put the pegs over the bag's top edge with the counter plate inside, and emboss just under the fold.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the logo embosser
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.