# Logo push clicker: press the logo, hear it click

> A button with your logo on it that clicks when you press it and clicks again when you let go. The spring is printed too, so there is nothing to buy or assemble. Upload any logo.

Web page: https://stlmint.app/designs/logo-push-clicker

Personalise it in the studio: https://stlmint.app/app?p=logo-push-clicker

## Details

- Category: [Fidget clickers](https://stlmint.app/designs/fidget-clickers.md)
- Price: $4 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 34 × 69 × 6 mm (3.4 × 6.9 cm) with the example text
- You type: Your logo, Words on the body, Click, Spring, plus 6 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. One Strike (one piece): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- Upload any logo: PNG, JPG or SVG
- Clicks on the way down and on the way back
- The spring is printed in: one piece, straight off the bed
- No switch, metal spring or magnet to buy
- Soft, firm or hard clicks; light, medium or strong spring
- Your name or website across the body

## Good for

- Company merch and giveaways
- Café and shop loyalty gifts
- Conference swag
- Desk fidgets
- Keyrings
- Team gifts

## Press the logo

The clicker people know is a button: press it, it clicks. This one puts the customer's logo on the button itself, so every click is a thumb on the logo. It needs no keyboard switch and no metal spring: the spring is part of the print, and you can watch it work through the window in the body.

## How it works

- The button's edges are a V that sits in matching grooves in the body's two arms, so it moves up and down but can't lift out.
- A zigzag spring under the button, printed in, pushes it back up.
- A tooth on a spring tongue in each arm snaps over a ridge on the button: one click down, one click back.
- A wide head on the button lands on the arms just after the click, so it can't be pushed too far.

## Printing tips

- Print it flat as it comes, with no supports, at 100% infill (the Bambu 3MF is set to this already).
- Change filament where the logo and words begin (0.8 mm under the top).
- Press it a few times when it comes off the bed to free the button.
- Thin lines in a busy logo print better with the logo's lines thickened a little (All options).

## Selling tips

Print one in your own filament first and choose the click and spring that feel best, then keep those settings for the batch. Compact, bold logos suit the button; put the name on the body. For a quieter fidget with a bigger logo, offer the [click dial](/designs/logo-click-dial).

## Questions about the logo push clicker

### What logo can I use?

Any picture of it: a PNG, JPG, WebP or SVG. A logo on a plain white or see-through background works best. The studio reads it in your browser, splits it into dark and light, and shows the shape that will print; tick “Light logo on dark background” for a white logo on a coloured square. Photos and soft shadows don't work.

### How does it click without a switch?

A springy tongue is cut in each side of the body, with a small tooth on its end. The button has a ridge on each edge. Press, and the teeth snap over the ridges; let go, and the printed spring pushes the button back up and the teeth snap over again. The teeth are steep on the way down and gentle on the way back, so the press has a clear click and the button always returns.

### Is the spring really printed?

Yes. It is a zigzag of plastic leaves under the button, printed flat with everything else and joined to both the button and the body, so the whole clicker is one piece. Each leaf bends only a little, which PLA takes again and again; PETG is tougher still.

### How should I print it?

Flat on the bed as it comes, no supports. The Bambu 3MF prints it at 100% infill so the spring and tongues are solid plastic; with the STL, set infill to 100% yourself. Change filament where the logo and words begin (0.8 mm under the top).

### The button doesn't come back up, or the click is weak. What do I change?

If the button stays down, pick a softer click or a stronger spring. If the click is too faint, pick a harder click. If the button is stuck when it comes off the bed, work it up and down a few times, and if it stays stuck raise the fit in All options and reprint.

### How many colours does it need?

Two, stacked. The body, button and spring print in one colour and the logo and words stand on top in the second, so one filament change does it on any printer.

### Can I sell these with my customers' logos?

Yes, on the Seller plan. Only put a logo on a clicker when the customer owns it or has permission to use it.

## Sellers also offer

- [Logo Click Dial](https://stlmint.app/designs/logo-click-dial.md): A coin with your logo on it that clicks as it turns in its ring, with your name round the edge. Prints in place, no metal parts. ($4 a file, 2 colours)
- [Logo Click Slider](https://stlmint.app/designs/logo-click-slider.md): A tile with your logo on it that slides along a track and clicks into every stop, with your name on the frame. Prints in place, no metal parts. ($4 a file, 2 colours)
- [Logo Clicker Business Card](https://stlmint.app/designs/logo-clicker-business-card.md): A business card people keep: a coin with your logo clicks as it turns in the card, with your name, title and contact details beside it. ($5 a file, 2 colours)
