Digital 3D print fileDownloads as STL3MF
Menu card holder with the café's name
Holds the café's own menu or QR card upright on the table, with the café's name along a low front rail. Four flat pieces that slot together.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 4 pieces on 1 platePrints as pieces that slot or press together; the studio shows it assembled.
What you download
menu-card-holder-Cafe-Rosa.stlFor any slicer and any 3D printermenu-card-holder-Cafe-Rosa.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 148 × 50 × 32 mm (14.8 × 5.0 cm) with the example text
- You type
- Café name, Small line, Card width (mm), plus 12 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Holds the café's own printed menu, a laminated sheet or an acrylic QR card
- The card leans back a little, so it reads from the chair
- The café's name and a short line along the front rail
- Four flat pieces that slot together with no glue, and come apart flat
- Set the card's width and thickness, from a 100 mm QR card to an A4 menu
The café's own menu, on the table
Most cafés already have a menu they like: a printed card, a laminated sheet, or a QR code from their ordering app. What they don't have is something nice to stand it in. This holder grips the card in two leaning slots and puts the café's name along a low rail in front, so the menu reads from the chair and the brand sits on every table.
When the menu changes, the café swaps the card. The holder stays.
Printing tips
- Print the four pieces flat, face up, in one go: the front rail in two colours, the rest in the base colour.
- Measure the card's thickness and add nothing: the slot fit is added for you. If the card is loose, lower slot_fit.
- Print one and try the card in it before printing a set for every table.
Selling tips
Sell one per table, in the café's colours. Offer the menu card holder with the napkin holder as a table set.
Questions about the menu card holder
What card does it hold?
Any flat card or sheet: set card_width to its width and card_thickness to its thickness. A laminated sheet is about 0.5 mm, a card in a plastic sleeve about 1 mm, an acrylic QR card 3 mm.
How is it put together?
The two side pieces slot onto the front and back rails from above, like a crate. The card then drops into the leaning slots in the side pieces. Nothing needs glue, and it comes apart flat.
How is it different from the table number tent?
The table number tent prints its own QR code. This holder takes the café's own menu card, so they can change the menu or the code without reprinting the holder.
Will a tall menu tip it over?
The back rail sits far enough behind the card to hold an A4 sheet leaning back. For a very tall or heavy card, lower the lean.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the menu card holder
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.