# Menu card holder with the café's name

> Holds the café's own menu or QR card upright on the table, with the café's name along a low front rail. Four flat pieces that slot together.

Web page: https://stlmint.app/designs/menu-card-holder

Personalise it in the studio: https://stlmint.app/app?p=menu-card-holder

## Details

- Category: [Cafés and restaurants](https://stlmint.app/designs/restaurants.md)
- Price: $4 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 148 × 50 × 32 mm (14.8 × 5.0 cm) with the example text
- You type: Café name, Small line, Card width (mm), plus 12 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. Mint Set (4 pieces on 1 plate): Prints as pieces that slot or press together; the studio shows it assembled.

## Why sellers like it

- Holds the café's own printed menu, a laminated sheet or an acrylic QR card
- The card leans back a little, so it reads from the chair
- The café's name and a short line along the front rail
- Four flat pieces that slot together with no glue, and come apart flat
- Set the card's width and thickness, from a 100 mm QR card to an A4 menu

## Good for

- Cafés
- Restaurants
- Dhabas
- Hotel dining rooms
- Bars

## The café's own menu, on the table

Most cafés already have a menu they like: a printed card, a laminated sheet, or a QR code from their ordering app. What they don't have is something nice to stand it in. This holder grips the card in two leaning slots and puts the café's name along a low rail in front, so the menu reads from the chair and the brand sits on every table.

When the menu changes, the café swaps the card. The holder stays.

## Printing tips

- Print the four pieces flat, face up, in one go: the front rail in two colours, the rest in the base colour.
- Measure the card's thickness and add nothing: the slot fit is added for you. If the card is loose, lower slot_fit.
- Print one and try the card in it before printing a set for every table.

## Selling tips

Sell one per table, in the café's colours. Offer the menu card holder with the napkin holder as a table set.

## Questions about the menu card holder

### What card does it hold?

Any flat card or sheet: set card_width to its width and card_thickness to its thickness. A laminated sheet is about 0.5 mm, a card in a plastic sleeve about 1 mm, an acrylic QR card 3 mm.

### How is it put together?

The two side pieces slot onto the front and back rails from above, like a crate. The card then drops into the leaning slots in the side pieces. Nothing needs glue, and it comes apart flat.

### How is it different from the table number tent?

The table number tent prints its own QR code. This holder takes the café's own menu card, so they can change the menu or the code without reprinting the holder.

### Will a tall menu tip it over?

The back rail sits far enough behind the card to hold an A4 sheet leaning back. For a very tall or heavy card, lower the lean.

## Ideas for selling it

- [Order numbers, reserved signs and table pieces for cafés and restaurants](https://stlmint.app/ideas/cafes-and-restaurants.md)

## Sellers also offer

- [Table Number Tent](https://stlmint.app/designs/table-number-tent.md): A big table number and a code, on two plates that lean together so it reads from both sides. ($4 a file, 2 colours)
- [Napkin Holder](https://stlmint.app/designs/napkin-holder.md): An upright napkin holder with the restaurant's name on both plates. ($5 a file, 2 colours)
- [Reserved Table Block](https://stlmint.app/designs/reserved-table-block.md): A chunky RESERVED block with the restaurant's name, standing on its own bevelled edge. ($4 a file, 2 colours)
