Digital 3D print fileDownloads as STL3MF
Name bunting: a garland with a letter on every flag
A garland of little flags with one letter on each: a name, HAPPY BIRTHDAY or CHEERS. A ribbon weaves through two slots on each flag, or twine through two holes. Triangles, swallowtails or round-bottomed flags, laid out plate by plate in reading order.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike 12 pieces, each ready to useComes off the plate ready to use, with nothing to put together.
What you download
name-bunting-MILA-TURNS-5.stlFor any slicer and any 3D printername-bunting-MILA-TURNS-5.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 236 × 205 × 3 mm (23.6 × 20.5 cm) with the example text
- You type
- Letters, Flag shape, Between words, Hang on, plus 8 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- One letter on each flag, all at one size so the garland matches
- A space between words becomes a flag with a star or a heart, or a gap in the ribbon
- Slots for a ribbon up to 25 mm wide, or holes for twine; the ribbon runs behind each flag, so the letters show in full
- Triangles, swallowtails or round-bottomed flags, 56 by 66 mm by default and adjustable
- Laid out in reading order across as many plates as it needs; triangles nest point up and point down, so more fit on a plate
- Two colours, no supports, and it can be hung again every year
A banner with their name on it
Paper bunting tears, curls and goes in the bin with the wrapping paper. A printed garland lasts for every birthday after, and it can say exactly what the party needs: MILA TURNS 5, HAPPY BIRTHDAY, CHEERS for a bar, a couple's names for an engagement, or MERRY CHRISTMAS on the mantelpiece.
Each flag carries one letter. A space between words becomes a small flag with a star or a heart, or just a gap in the ribbon. Every letter is set at the same size, so the line reads evenly from across the room.
Ribbon or twine
The top of each flag has two slots for a ribbon, or two holes for twine. Thread it in at the front, along the back and out again, so the ribbon shows between the flags and the letters stay clear. Slide the flags along to space them out.
Three kinds of flag
- Swallowtail: a square flag with a notched tail; the letters come out biggest.
- Triangle: classic bunting. Every other one turns point up on the bed, so half as many again fit on a plate.
- Round: a soft, round-bottomed flag for baby showers and naming ceremonies.
Printing tips
- Print face up; change filament where the letters start (at 2 mm).
- The flags come in reading order, left to right and top to bottom, plate after plate. Keep them in order as they come off the bed.
- Pastel flags with white letters for a baby shower; red and white or green and gold for Christmas.
Selling tips
Sell it with a bunting cake topper or an arched cake topper with the same name, and glass rim markers for the guests. Shops and cafés buy seasonal garlands for their windows: SALE, OPEN, DIWALI, MERRY CHRISTMAS.
Questions about the name bunting
How do I string it?
Each flag has two slots along its top. Thread the ribbon from the front into the first slot, along the back and out of the second slot, then on to the next flag. The ribbon shows between the flags and not across the letters. Slide the flags along to space them. With twine, do the same through the two holes.
What ribbon does it take?
The slots are cut 1.2 mm longer than the ribbon width you set, 10 mm by default, and 2.6 mm wide, which takes satin and grosgrain ribbon. Set the ribbon width in the studio to match what you have.
How long can it be?
Up to 30 flags. They are laid out in rows across your bed, in reading order; when a plate is full the next flags start on a plate beside it. Set your bed size in the studio. At the default size, 12 swallowtails fit on a 256 mm bed, or 18 triangles, because every other one turns point up.
Why do all the letters come out the same size?
So the garland matches: every letter is sized to fit the widest and tallest letter in it. A W or an M makes the rest a little smaller; capitals look the most even.
Can I sell it?
Yes, on the Seller plan. Birthday bunting with the child's name and age is a classic party order, and it pairs with a cake topper and return gifts.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the name bunting
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.