Digital 3D print fileDownloads as STL3MF

Name puzzle for toddlers

A child's name as chunky, rounded letters that lift out of a board. Every letter fits only its own pocket, and neighbouring letters come in different colours.

What you download

  • name-puzzle-MAYA.stlFor any slicer and any 3D printer
  • name-puzzle-MAYA.3mfA Bambu Studio project with the colours set

Digital files only. Nothing is posted: you print it yourself, for you or for your customers.

Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence

Size
About 220 × 60 × 9 mm (22.0 × 6.0 cm) with the example text
You type
Child's name, Extra piece, Layout, plus 15 more options for fine-tuning
Colours
5 parts (base, l1, l2, l3, l4), so it prints in 5 colours or as one
Files
STL for any slicer, plus a five-colour Bambu Studio project

Why sellers like it

  • Thick letters, 7 mm deep, with rounded corners and soft rounded top edges, and no thin bits to snap
  • Closed letters like A, B and O keep their middles: the board has a post they drop over
  • A star, heart, flower or cat as an extra piece after the name, or at both ends
  • Long names go onto two rows by themselves, breaking at a space if there is one
  • The board and every piece print flat with no supports, in up to five colours

Their own name, in pieces

Spelling their name is one of the first things a small child learns, and a name puzzle turns it into a game. Each letter lifts out of its own pocket and only fits back in its own place, so the shape teaches the order. Parents keep it on a shelf long after the child can spell, so it makes a good first-birthday or new-baby gift.

The letters are a rounded, extra-bold font, 7 mm thick, with a soft rounded top edge, and stand 3 mm proud of the board so they're easy to pick up. Closed letters like A, B, O and R keep their holes, and the board has a matching post in each pocket. A star, heart, flower or cat can go after the name as an extra piece, or at both ends. The cat has its face pressed into the top.

Printing tips

  • Print the board in white or a pale colour and the letters in four bright ones; the corner dots match the letter colours.
  • The board and each letter colour come on plates of their own, one filament each, so no AMS is needed. With an AMS, you can pick the AMS version in the studio instead.
  • Print one letter first and test it in the board. If it's tight, raise clearance a little and reprint.
  • Rounded fonts work best. Outfit Bold, the default, is the friendliest; DejaVu Sans Bold is wider and heavier.
  • Each piece has a small chamfer under its bottom edge so the first layer leaves no sharp lip. Still run a finger round every piece and trim any stray strings before you give it to a child.

Selling tips

Nurseries and playschools order one per child at the start of the year, so offer a price for a class set. Gift shops can list it with a choice of motif and colour set, and print orders as they come in: the file is ready in seconds for any name.

Questions about the name puzzle

How big is it?

A four-letter name with a star makes a board 220 mm long and 60 mm tall, with letters about 35 mm tall. Letters can be up to 50 mm tall, but a longer name gets smaller letters so the board stays within 220 mm. When one row would make the letters smaller than 30 mm, the name moves onto two rows.

Will the letters fit their pockets?

Each piece is 0.4 mm smaller than its pocket all round, and each pocket has a small chamfer round its mouth, so pieces find their way in and lift out easily. If your printer prints tight, raise clearance to 0.5 or 0.6. The pockets are 4 mm deep and the letters are 7 mm thick, so they stand 3 mm proud for small fingers to grab. Pieces always stand at least 2 mm proud, whatever depth and thickness you set.

How do the colours work?

The board is one colour. The letters take turns through four colours, so no two letters next to each other match. The four dots in the board's corners show the set. Print every piece in one colour if you like: change the colours in your slicer.

Can it spell lowercase letters or accents?

Letters are always made capitals, so every letter is one solid piece. Accented letters like Ö or É would come out as more than one piece, so stick to A to Z and numbers.

Is it safe for toddlers?

The pieces are big and thick, with rounded corners and rounded top edges. Like any toy, check the print for sharp edges and loose strings, and keep it for children old enough not to chew on it. PETG is tougher than PLA if it gets thrown about.

Ideas for selling it

More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.

Sellers also offer

Start selling the name puzzle

Type your customer's text, send them the picture, download the print file.

Personalise this design

Early Black Fridaythrough Nov 30 (US Pacific time)

The Seller plan at $12 $6 a month

For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.

Get the Seller plan