Digital 3D print fileDownloads as STL3MF
Order number tent for counter-service cafés
The number a counter hands over with the order: two plates lean together under a ridge cap, so the runner finds the table from either side.
- Clad 2 colours, 1 filament swap across 2 platesColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 3 pieces on 2 platesPrints as pieces that slot or press together; the studio shows it assembled.
What you download
order-number-tent-27.stlFor any slicer and any 3D printerorder-number-tent-27.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 77 × 58 × 90 mm (7.7 × 5.8 cm) with the example text
- You type
- Number, Word over the number, Line under the number, plus 18 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- One big number on both plates, so it reads from either side of the table
- The plates lean together under a ridge cap and come apart flat for the drawer
- Stands on two feet, with the bottom edges cut at the lean so they sit flat
- A small word over the number and an optional line under it for the café's name
- Plates print flat and the cap prints slots up, with no supports
The number that goes with the order
At a counter-service café the order is taken at the till, and the food comes out later to wherever the customer sat down. A number on the table joins the two. The customer carries this tent to their table, and the runner walking out with the tray looks for the number, not the face.
The two plates lean together like a small tent, held at the top by a ridge cap, so the number faces both ways down the table. Each plate stands on two feet with an arch between them. The feet are cut at the lean, so they sit flat on the table instead of rocking on an edge.
Printing tips
- High contrast reads best across a room: white on dark, or black on yellow.
- The cap grips the plates. Print one test tent first and adjust
slot_fitbefore printing a set of thirty. - Big Shoulders Bold is tall and narrow, so two and three digit numbers stay large.
Selling tips
Sell a numbered set, not single tents: 1 to 20 for a small café, 1 to 50 for a busy one, in the café's colours with its name along the bottom. Replacements for lost numbers are a reason for the café to come back to you.
Questions about the order number tent
How do I make a full set?
On the Seller plan, paste the numbers one per line into a bulk order, 1 to 30 for example, and you get a ZIP with one file per number. Each file has both plates and the cap.
How big is it?
Each plate is 72 mm wide and stands about 85 mm high. Width, height and lean are in All options.
How do the colours work?
Plates and cap are one colour and the lettering another. Print with a pause at the top of the plates, or use the two-colour Bambu Studio project. The cap prints on a plate of its own, so no AMS is needed.
Does it stay together when carried?
The cap grips both plates, so it lifts as one piece by the cap. If a cap is loose, lower slot_fit a little for the next batch.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the order number tent
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.