Digital 3D print fileDownloads as STL3MF

Order peg with the customer's name

A flat clip that springs: push it onto a packed bag or pin the order slip with it, and the shelf shows whose order is whose.

What you download

  • order-peg-Sophia.stlFor any slicer and any 3D printer
  • order-peg-Sophia.3mfA Bambu Studio project with the colours set

Digital files only. Nothing is posted: you print it yourself, for you or for your customers.

Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence

Size
About 91 × 32 × 7 mm (9.1 × 3.2 cm) with the example text
You type
Customer name, Order number, Top edge, plus 11 more options for fine-tuning
Colours
2 parts (base, text), so it prints in 2 colours or as one
Files
STL for any slicer, plus a two-colour Bambu Studio project

Why sellers like it

  • One flat piece that springs: a round loop at the back works as the spring, no metal spring and no assembly
  • Interlocking teeth grip a folded bag top or an order slip, and a flared mouth lets the paper slide in
  • The customer's name on the plate, with an order number badge and a short line such as ORDER READY
  • A number on its own works too, for a numbered set 1 to 50
  • Flat, scalloped or arched top edge; the loop hangs the pegs on a hook when they're not in use

Whose bag is this?

On a busy afternoon a home baker's shelf fills up with brown paper bags that all look the same. A name scrawled on the bag gets missed, and a loose slip tucked in the fold falls out. An order peg sits on the top of the bag where everyone can see it: push it onto the folded top, or clip the order slip to the bag with it. It lies along the fold with the name facing up, so anyone looking down at the shelf reads it first.

The peg is one flat print with no metal spring. The plate with the name is the top jaw, a slim bar under it is the bottom jaw, and a round loop at the back joins them and bends like a spring. Teeth along both jaws interlock with a small gap, so a folded bag top or a slip zigzags between them and stays put. The front of the mouth flares open so paper slides in, and a thumb lip on the bottom jaw pulls it open.

Put the customer's name on it with an order number in a round badge, or a number on its own for a set that goes back on the hook after each order. The loop at the back hangs the whole set on a hook or a nail by the shelf.

Printing tips

  • PETG springs best. In PLA it still works; just don't pull the jaw far past what the bag needs.
  • The Bambu 3MF prints it at 100% infill. With an STL, use four walls or solid infill so the spring loop is solid plastic.
  • High contrast reads best across a counter: cream lettering on a dark peg, or black on kraft brown.
  • If the teeth come out stuck together, snap them apart once with a fingernail or raise grip_gap by 0.1 mm.

Selling tips

Sell bakers a numbered set of 25 or 50 in their brand colours, with a few spares. Shops that pack named orders can reorder the names in bulk each week. A scalloped peg in pastel colours suits cake shops and gift boxes.

Questions about the order peg

How does a flat print turn into a clip?

The plate is the top jaw and a slim bar under it is the bottom jaw. They're joined only by the round loop at the back, which bends like a spring. Pinch the thumb lip at the front and pull it away from the plate: the mouth opens 6 to 8 mm. Let go and the teeth close on the paper.

Which way does the name face?

The jaws close in the same plane as the plate, so on the top of a bag the peg lies flat along the fold with the name facing up. It reads from above, the way you look down at a shelf or a tray of bags. Clip it on the side edge of a bag and the name faces sideways instead.

What should I print it in?

PETG springs best and won't tire. PLA works for everyday use; just don't pull the jaw open further than it needs. The Bambu 3MF prints it solid by itself; with an STL, print at 100% infill or with at least four walls so the loop is solid plastic.

What does it hold?

The folded top of a paper bag, a cake box flap, an order slip or a receipt. The teeth are printed with a small gap between them and the paper zigzags through it, so it holds by the zigzag as much as by the spring. For a firmer grip, raise the spring wall in All options; if the teeth fuse on your printer, raise grip_gap.

How do I make a set?

On the Seller plan, paste the names or the numbers one per line into a bulk order, 1 to 50 for example. You get a ZIP with one file per peg.

How big is it?

76 mm plate and 6 mm thick, about 91 by 32 mm with the loop and the thumb lip. Length, plate height, thickness and the spring's wall are in All options.

Ideas for selling it

More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.

Sellers also offer

Start selling the order peg

Type your customer's text, send them the picture, download the print file.

Personalise this design

Early Black Fridaythrough Nov 30 (US Pacific time)

The Seller plan at $12 $6 a month

For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.

Get the Seller plan