# Order peg with the customer's name

> A flat clip that springs: push it onto a packed bag or pin the order slip with it, and the shelf shows whose order is whose.

Web page: https://stlmint.app/designs/order-peg

Personalise it in the studio: https://stlmint.app/app?p=order-peg

## Details

- Category: [Cafés and restaurants](https://stlmint.app/designs/restaurants.md)
- Price: $3 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 91 × 32 × 7 mm (9.1 × 3.2 cm) with the example text
- You type: Customer name, Order number, Top edge, plus 11 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. One Strike (one piece): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- One flat piece that springs: a round loop at the back works as the spring, no metal spring and no assembly
- Interlocking teeth grip a folded bag top or an order slip, and a flared mouth lets the paper slide in
- The customer's name on the plate, with an order number badge and a short line such as ORDER READY
- A number on its own works too, for a numbered set 1 to 50
- Flat, scalloped or arched top edge; the loop hangs the pegs on a hook when they're not in use

## Good for

- Home bakers
- Cake shops
- Takeaway counters
- Online sellers
- Gift shops

## Whose bag is this?

On a busy afternoon a home baker's shelf fills up with brown paper bags that all look the same. A name scrawled on the bag gets missed, and a loose slip tucked in the fold falls out. An order peg sits on the top of the bag where everyone can see it: push it onto the folded top, or clip the order slip to the bag with it. It lies along the fold with the name facing up, so anyone looking down at the shelf reads it first.

The peg is one flat print with no metal spring. The plate with the name is the top jaw, a slim bar under it is the bottom jaw, and a round loop at the back joins them and bends like a spring. Teeth along both jaws interlock with a small gap, so a folded bag top or a slip zigzags between them and stays put. The front of the mouth flares open so paper slides in, and a thumb lip on the bottom jaw pulls it open.

Put the customer's name on it with an order number in a round badge, or a number on its own for a set that goes back on the hook after each order. The loop at the back hangs the whole set on a hook or a nail by the shelf.

## Printing tips

- PETG springs best. In PLA it still works; just don't pull the jaw far past what the bag needs.
- The Bambu 3MF prints it at 100% infill. With an STL, use four walls or solid infill so the spring loop is solid plastic.
- High contrast reads best across a counter: cream lettering on a dark peg, or black on kraft brown.
- If the teeth come out stuck together, snap them apart once with a fingernail or raise grip_gap by 0.1 mm.

## Selling tips

Sell bakers a numbered set of 25 or 50 in their brand colours, with a few spares. Shops that pack named orders can reorder the names in bulk each week. A scalloped peg in pastel colours suits cake shops and gift boxes.

## Questions about the order peg

### How does a flat print turn into a clip?

The plate is the top jaw and a slim bar under it is the bottom jaw. They're joined only by the round loop at the back, which bends like a spring. Pinch the thumb lip at the front and pull it away from the plate: the mouth opens 6 to 8 mm. Let go and the teeth close on the paper.

### Which way does the name face?

The jaws close in the same plane as the plate, so on the top of a bag the peg lies flat along the fold with the name facing up. It reads from above, the way you look down at a shelf or a tray of bags. Clip it on the side edge of a bag and the name faces sideways instead.

### What should I print it in?

PETG springs best and won't tire. PLA works for everyday use; just don't pull the jaw open further than it needs. The Bambu 3MF prints it solid by itself; with an STL, print at 100% infill or with at least four walls so the loop is solid plastic.

### What does it hold?

The folded top of a paper bag, a cake box flap, an order slip or a receipt. The teeth are printed with a small gap between them and the paper zigzags through it, so it holds by the zigzag as much as by the spring. For a firmer grip, raise the spring wall in All options; if the teeth fuse on your printer, raise grip_gap.

### How do I make a set?

On the Seller plan, paste the names or the numbers one per line into a bulk order, 1 to 50 for example. You get a ZIP with one file per peg.

### How big is it?

76 mm plate and 6 mm thick, about 91 by 32 mm with the loop and the thumb lip. Length, plate height, thickness and the spring's wall are in All options.

## Ideas for selling it

- [Personalised prints to sell to small businesses](https://stlmint.app/ideas/small-businesses.md)

## Sellers also offer

- [Pickup Token](https://stlmint.app/designs/pickup-token.md): A numbered token handed over the counter with the order and called back when the food is ready. ($3 a file, 2 colours)
- [Order Pick](https://stlmint.app/designs/order-pick.md): A little flag on a spike that says what is special about the plate: NO ONION, VEGAN, a table number. ($3 a file, 2 colours)
- [Bag Stamp](https://stlmint.app/designs/bag-stamp.md): A hand stamp with the shop's name in mirrored raised letters, for branding paper bags and boxes. ($3 a file)
