Digital 3D print fileDownloads as STL3MF

Pivot sweep name plate

Two lines of letters turned together about one pivot along the front of the base: the upper line sweeps back in a wide arc over the lower line's tight one, and both lie flat behind the face.

What you download

  • pivot-sweep-name-plate-DREAM-BIG.stlFor any slicer and any 3D printer
  • pivot-sweep-name-plate-DREAM-BIG.3mfA Bambu Studio project with the colours set

Digital files only. Nothing is posted: you print it yourself, for you or for your customers.

Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence

Size
About 164 × 70 × 56 mm (16.4 × 7.0 cm) with the example text
You type
Upper line, Lower line, plus 12 more options for fine-tuning
Colours
2 parts (base, text), so it prints in 2 colours or as one
Files
STL for any slicer, plus a two-colour Bambu Studio project

Why sellers like it

  • Both lines share one pivot, so the upper line's sweep arcs over the lower one
  • Choose the angle of the face, from leaning well back to upright
  • At 45 degrees or lower it prints with no supports
  • Each line has its own font and size
  • Base follows the letters, or a rounded plate

Two sweeps from one pivot

Both lines are drawn on one face and turned together about a single pivot along the front of the base. The upper line is further from the pivot, so it sweeps a wide arc; the lower line sweeps a tight one underneath it. Seen from the side, it is two nested curves running down to the base.

Printing tips

  • Print it base down. A dark base with bright letters shows the two sweeps best.
  • A steeper face gives a longer curve and a taller plate; a lower one prints more easily. The default 60 degrees overhangs a little under the upper line, which most printers handle.

Selling tips

Put a name on the lower line and a word or motto above it, or the other way round. A big upper line over a small lower one shows off the nested curves most.

Questions about the pivot sweep name plate

Can the face stand upright?

Yes, set the face angle to 90. The steeper the face, the more the underside of the upper line overhangs at the front: at 45 degrees or lower it prints in open air, about 60 degrees prints on most printers, and upright needs supports under the upper line.

Can I have just one line?

Yes. Clear the lower line and the upper line sits on the pivot by itself.

How is it printed?

Base down, as designed, in two colours: the base, and the swept letters.

How big is it?

It follows the text. Front to back it is as deep as the two lines are tall on the face, and a line longer than the longest length you set gets smaller letters.

Sellers also offer

Start selling the pivot sweep name plate

Type your customer's text, send them the picture, download the print file.

Personalise this design

Early Black Fridaythrough Nov 30 (US Pacific time)

The Seller plan at $12 $6 a month

For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.

Get the Seller plan