# Pivot sweep name plate

> Two lines of letters turned together about one pivot along the front of the base: the upper line sweeps back in a wide arc over the lower line's tight one, and both lie flat behind the face.

Web page: https://stlmint.app/designs/pivot-sweep-name-plate

Personalise it in the studio: https://stlmint.app/app?p=pivot-sweep-name-plate

## Details

- Category: [Signs and name plates](https://stlmint.app/designs/signs.md)
- Price: $4 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 164 × 70 × 56 mm (16.4 × 7.0 cm) with the example text
- You type: Upper line, Lower line, plus 12 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. One Strike (one piece): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- Both lines share one pivot, so the upper line's sweep arcs over the lower one
- Choose the angle of the face, from leaning well back to upright
- At 45 degrees or lower it prints with no supports
- Each line has its own font and size
- Base follows the letters, or a rounded plate

## Good for

- Kids' rooms
- Desks and shelves
- Family names
- Quotes and mottos
- Gamer setups

## Two sweeps from one pivot

Both lines are drawn on one face and turned together about a single pivot along the front of the base. The upper line is further from the pivot, so it sweeps a wide arc; the lower line sweeps a tight one underneath it. Seen from the side, it is two nested curves running down to the base.

## Printing tips

- Print it base down. A dark base with bright letters shows the two sweeps best.
- A steeper face gives a longer curve and a taller plate; a lower one prints more easily. The default 60 degrees overhangs a little under the upper line, which most printers handle.

## Selling tips

Put a name on the lower line and a word or motto above it, or the other way round. A big upper line over a small lower one shows off the nested curves most.

## Questions about the pivot sweep name plate

### Can the face stand upright?

Yes, set the face angle to 90. The steeper the face, the more the underside of the upper line overhangs at the front: at 45 degrees or lower it prints in open air, about 60 degrees prints on most printers, and upright needs supports under the upper line.

### Can I have just one line?

Yes. Clear the lower line and the upper line sits on the pivot by itself.

### How is it printed?

Base down, as designed, in two colours: the base, and the swept letters.

### How big is it?

It follows the text. Front to back it is as deep as the two lines are tall on the face, and a line longer than the longest length you set gets smaller letters.

## Sellers also offer

- [Sweeping Name Plate](https://stlmint.app/designs/sweeping-name-plate.md): Tall letters that stand up at the front and sweep back in a curve to the base, on one or two lines. ($4 a file, 2 colours)
- [Wedge Name Plate](https://stlmint.app/designs/wedge-name-plate.md): The classic office desk plate, with a name and a job title on the sloping front. ($4 a file, 2 colours)
- [Desk Name Plate](https://stlmint.app/designs/desk-name-plate.md): The name across the front of a desk organiser with a pen cup, tray and card slot. ($5 a file, 2 colours)
