# Place card holder with the couple's initials

> A low heart, leaf sprig, hexagon or lotus foot that holds each guest's paper place card upright in a gently waved slot, with the couple's initials and the date. Guests take it home as a favour.

Web page: https://stlmint.app/designs/place-card-holder

Personalise it in the studio: https://stlmint.app/app?p=place-card-holder

## Details

- Category: [Wedding and event details](https://stlmint.app/designs/event-details.md)
- Price: $3 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 66 × 60 × 14 mm (6.6 × 6.0 cm) with the example text
- You type: Couple's initials, Date or word, Shape, plus 11 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. One Strike (one piece): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- Holds a standard paper or card place card upright; the wavy slot grips thin card so it doesn't slip
- A straight slot for thick or laminated cards, and the card thickness is adjustable
- Four feet: a heart, an oval with a leaf sprig, a hexagon with a double line and a lotus
- The couple's initials and the date on the foot, in front of the card
- 66 mm across and 14 mm tall; the slot prints standing open, so no supports
- One file, printed once per guest: the guest's name goes on the paper card

## Good for

- Wedding receptions
- Engagement dinners
- Sangeet and mehendi nights
- Anniversary dinners
- Corporate dinners

## A place card that stays standing

Paper place cards fall over, blow off and end up in the napkin. A small holder keeps each one upright at its seat, and because it carries the couple's initials and the date, guests take it home afterwards as a keepsake.

The holder is a low foot with a ridge across the back. A slot runs down into the ridge, and it snakes gently from side to side, so a thin card bends a little as it goes in and stays gripped. The top of the ridge arches down at its ends and the mouth of the slot is chamfered, so the card finds its way in. For thick or laminated cards, switch to a straight slot.

Pick a **heart** with a fine line round its edge, an **oval** with a leaf sprig curling round the front, a **hexagon** with a double line, or a **lotus** whose petals are drawn in outline round a central disc. The initials and date sit in front of the card.

## Printing tips

- Print flat on its foot. The slot stands open at the top, so it needs no supports.
- Set the card thickness to match the actual cards before printing the whole batch, and print one to test the fit.
- Change filament at the top of the foot (4 mm) for the lettering colour. Everything above the foot is that colour, ridge included, so no AMS is needed.
- At 66 mm across, about a dozen fit on one plate of a 256 mm bed.

## Selling tips

This is a one-file favour: the same holder for every guest. Price it per piece with a drop at 50 and 100, and offer printed place cards on top if you have a printer for paper. Pair it with matching [table number stakes](/designs/table-number-stake) for the centrepieces.

## Questions about the place card holder

### What size of place card does it hold?

A standard flat place card, around 90 mm wide, standing in a slot 10 mm deep. The slot runs out through both ends of the ridge at the back of the foot, so the card can be wider than the holder and simply overhangs it.

### How does the wavy slot grip the card?

The slot snakes gently from side to side. A thin card bends a little to follow it as you push it in, and that bend holds it upright. For thick card, laminated card or acrylic, switch the grip to Straight and set the card thickness.

### Where does the guest's name go?

On the paper card. The holder carries the couple's initials and the date, so one file prints once per guest and you don't need a file per name. If you'd rather print the guest's name too, see the seating chart pegs and the standing place cards.

### Why does the date look small?

The date line fits the room in front of the card at up to 3.6 mm high. A short word such as THANK YOU or a short date such as 12.12.26 prints biggest. You can also drop it and give the initials the room.

### Which filament should I use?

PLA is fine. Ivory, white or sage for the foot with gold or champagne lettering looks best on a dinner table. Change filament at the top of the foot (4 mm) for the lettering; the ridge rises in the same colour.

## Ideas for selling it

- [Personalised wedding favours to 3D print and sell](https://stlmint.app/ideas/wedding-favours.md)

## Sellers also offer

- [Table Number Stake](https://stlmint.app/designs/table-number-stake.md): A wedding table number on a stiff stake that pushes into the centrepiece, in an arch, a leaf wreath, a hexagon or a scooped card, with the couple's initials underneath. ($4 a file, 2 colours)
- [Wedding Favour Keychain](https://stlmint.app/designs/wedding-favour-keychain.md): The couple's names, a wedding motif and the date on a heart, medallion, Mughal arch or mandala keychain, laid out by the dozen on one plate. ($3 a file, 2 colours)
- [Seating Chart Pegs](https://stlmint.app/designs/seating-chart-pegs.md): A table's guest name tags that clip onto the twine of a string seating board with two hooked slits, with a header tag for the table, all on one plate. ($4 a file, 2 colours)
