# Prescription pad holder with the clinic's name

> A writing slope for the doctor's desk: the prescription pad lies at an easy angle, the clinic's name runs across the front lip, and the pen lies in a trough in front of the pad. Five flat pieces that slot together with no glue.

Web page: https://stlmint.app/designs/prescription-pad-holder

Personalise it in the studio: https://stlmint.app/app?p=prescription-pad-holder

## Details

- Category: [Clinics and pharmacies](https://stlmint.app/designs/clinics.md)
- Price: $5 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 168 × 188 × 67 mm (16.8 × 18.8 cm) with the example text
- You type: Clinic name, Line under the name, Pad width (mm), plus 10 more options for fine-tuning
- Colours: 2 parts (body, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap across 2 plates): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. Mint Set (5 pieces on 2 plates): Prints as pieces that slot or press together; the studio shows it assembled.

## Why sellers like it

- Holds an A5 pad by default, or any pad width from 90 to 160 mm
- A sloped deck at 15 degrees, adjustable from 8 to 25
- The clinic's name and a line for the doctor or phone number across the front lip
- A trough for the pen between the lip and the pad
- Five flat pieces slot together: the deck, two side cheeks, a back brace and the lip. No glue, no screws
- About 168 by 188 mm on the desk and 67 mm tall at the back

## Good for

- Doctors' desks
- Clinic reception counters
- Pharmacies
- Diagnostic labs
- Gifts from medical reps

## A slope to write on, with the clinic's name in front

A doctor writes dozens of prescriptions a day on a pad lying flat on the desk, often sliding about. This holder sets the pad at a gentle slope, the angle a writing desk has, and keeps it from sliding with a low stop along the front. In front of the stop is a trough where the pen lies, and in front of that the lip, with the clinic's name facing the patient.

## Five flat pieces, slotted together

Nothing is glued or screwed. The **deck** is the sloped surface. Two **side cheeks** stand under it, and tabs along their top edges come up through slots in the deck. A **brace** crosses the cheeks at the back with halving slots, so they can't splay. The **lip** stands in a row of slots along the front of the deck. Each cheek has a cross cut through it.

## Printing tips

- The deck prints on its own plate. The lip, cheeks and brace print together on a second plate, all 4 mm thick.
- Change filament at the top of the lip (4 mm) for the name: it is the only colour change.
- PLA is fine; PETG if it sits in a sunny window.

## Selling tips

Pitch it to the doctor with their own name across the lip, in the clinic's colours. For medical reps and pharma marketing teams, it is a desk gift that stays in front of the doctor all day: quote a run of 25 or 50 with each doctor's name, made from one list in a bulk order on the Seller plan.

## Questions about the prescription pad holder

### Which pad sizes does it fit?

A5 (148 mm wide) is the default. Set the pad width in mm for any other pad: the deck is always 20 mm wider than the pad. A pad longer than the deck simply overhangs at the back.

### How does it go together?

Push the two side cheeks' tabs up through the slots in the deck, slide the brace down onto the cheeks' back slots, then press the lip's tabs into the row of slots along the front. The tabs finish level with the deck, so the pad lies flat over them.

### Is it steady enough to write on?

Yes. The cheeks carry the deck along most of its length, and the brace holds them upright. If the slots are loose for your printer, set the fit a little tighter in All options; if they are tight, a little looser.

### Does it need an AMS?

No. The deck prints on its own plate in one colour. The lip, cheeks and brace print together on a second plate, where the only colour change is for the name on the lip.

### Who buys these?

Doctors and clinics for their own desks, and pharma companies and medical reps, who hand them out with the doctor's name on them. That second group orders in dozens.

## Ideas for selling it

- [Door signs, direction signs and medicine clips for clinics and pharmacies](https://stlmint.app/ideas/clinics-and-pharmacies.md)

## Sellers also offer

- [Doctor Status Sign](https://stlmint.app/designs/doctor-status-sign.md): A door sign with the doctor's name and degrees, and a window where IN or OUT slides into view at the push of a knob. ($5 a file, 3 colours)
- [Pill Reminder Clip](https://stlmint.app/designs/pill-reminder-clip.md): A clip for a strip of tablets with a sun and moon over the dose, so patients know when to take each one without reading the strip. ($3 a file, 2 colours)
- [Sticky Note Holder](https://stlmint.app/designs/sticky-note-holder.md): A pocket for a 3 inch sticky-note pad, a pen groove and the name on the front. ($4 a file, 2 colours)
