Digital 3D print fileDownloads as STL3MF
Rangoli border stencil that joins end to end
A long strip with paisleys, diyas, marigolds or Lakshmi's footsteps cut through it. Strips key together end to end, so a doorstep border or the edge round a big rangoli comes out even all the way.
- Fine One colourPrints in a single filament: any printer, no changes.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
rangoli-border-stencil.stlFor any slicer and any 3D printerrangoli-border-stencil.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 200 × 50 × 2 mm (20.0 × 5.0 cm) with the example text
- You type
- Motif, Edge, Strip or corner, plus 8 more options for fine-tuning
- Files
- STL for any slicer, plus a Bambu Studio project
Why sellers like it
- Six repeating motifs: paisley, leaf vine, diyas, marigolds, waves and Lakshmi's footsteps
- A row of dots, dashes or scallops along both edges, or plain edges
- Dovetail ends key strips together, and the pattern keeps the same spacing across the joint
- A corner piece with a flower in the corner turns the border round a rangoli or a doorway
- One colour, 1.5 mm thick, sized to the printer bed, prints flat with no supports
A border that stays even
Most of the work in a doorstep rangoli is the border: the same little motif again and again along the step or round the edge of the big design, and by the tenth paisley the spacing has drifted. A border stencil does the repeating for you. Lay the strip on the floor, sprinkle rangoli powder or chalk over the cut-outs, tap it, lift it straight up and lay it down again just past the last motif.
Pick a motif for the occasion: paisleys or a leaf vine for everyday, diyas for Diwali, marigolds for a wedding entrance, waves for a coastal home, or a pair of Lakshmi's footsteps stepping in from the edge. A row of dots, dashes or scallops runs along both edges. Print a few strips and a corner piece, key them together, and the whole border goes down in one go.
Printing tips
- Print in PETG if you can: it bends back instead of snapping when it's stepped on, and rinses clean.
- 1.5 mm is stiff enough to lift without the powder sliding; go to 2 mm for a strip that gets heavy use.
- Print one strip first and check the dovetail: if it's tight, raise fit to 0.3; if it's loose, lower it.
- Set length to your bed size. A 220 mm bed fits five repeats at the default spacing.
Selling tips
Sell a set: four strips and four corners in one motif frame a square about 53 cm across, room for a 40 cm rangoli inside. Societies, temples and event decorators buy several sets before Diwali, so list them three to four weeks ahead. A diya set and a marigold set side by side cover most orders.
Questions about the rangoli border stencil
How is it different from the rangoli stencil?
The rangoli stencil is a tile that builds up a pattern in the middle of the floor. This one is a strip that runs: you lay it down, sprinkle, lift it and lay it again further along, so it is made for borders, doorsteps and the edge round a bigger rangoli.
How big is it?
50 mm wide and up to 200 mm long, with a motif every 39 mm. The strip takes as many whole repeats as fit the length you set, so set length to your printer bed (up to 225 mm). Width, repeat and thickness are in All options.
How do the strips join?
Each strip has a dovetail on one end and a matching slot on the other. Push the dovetail of one into the slot of the next and they stay in line, with the motifs and edge dots spaced the same across the joint. Set ends to Square if you would rather just butt them up.
How does the corner piece work?
It is an L with a flower in the corner square and the same motif down both arms, facing in. One arm ends in a slot and the other in a dovetail, so you can go round a whole square with four corners and as many strips as you need, all facing the same way.
Will the pattern fall out?
No. Every island, like the inner band of the paisley or the heart of a flame, is held by a bridge (1.6 mm wide by default), so the stencil is one piece. Widen bridge for a stiffer stencil.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the rangoli border stencil
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.