# Rangoli border stencil that joins end to end

> A long strip with paisleys, diyas, marigolds or Lakshmi's footsteps cut through it. Strips key together end to end, so a doorstep border or the edge round a big rangoli comes out even all the way.

Web page: https://stlmint.app/designs/rangoli-border-stencil

Personalise it in the studio: https://stlmint.app/app?p=rangoli-border-stencil

## Details

- Category: [Seasonal keepsakes](https://stlmint.app/designs/seasonal-keepsakes.md)
- Price: $3 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 200 × 50 × 2 mm (20.0 × 5.0 cm) with the example text
- You type: Motif, Edge, Strip or corner, plus 8 more options for fine-tuning
- Files: STL for any slicer, plus a Bambu Studio project
- Printing: Fine (one colour): Prints in a single filament: any printer, no changes. One Strike (one piece): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- Six repeating motifs: paisley, leaf vine, diyas, marigolds, waves and Lakshmi's footsteps
- A row of dots, dashes or scallops along both edges, or plain edges
- Dovetail ends key strips together, and the pattern keeps the same spacing across the joint
- A corner piece with a flower in the corner turns the border round a rangoli or a doorway
- One colour, 1.5 mm thick, sized to the printer bed, prints flat with no supports

## Good for

- Diwali
- Doorsteps
- Pongal and Onam
- Wedding entrances
- Temples and societies

## A border that stays even

Most of the work in a doorstep rangoli is the border: the same little motif again and again along the step or round the edge of the big design, and by the tenth paisley the spacing has drifted. A border stencil does the repeating for you. Lay the strip on the floor, sprinkle rangoli powder or chalk over the cut-outs, tap it, lift it straight up and lay it down again just past the last motif.

Pick a motif for the occasion: paisleys or a leaf vine for everyday, diyas for Diwali, marigolds for a wedding entrance, waves for a coastal home, or a pair of Lakshmi's footsteps stepping in from the edge. A row of dots, dashes or scallops runs along both edges. Print a few strips and a corner piece, key them together, and the whole border goes down in one go.

## Printing tips

- Print in PETG if you can: it bends back instead of snapping when it's stepped on, and rinses clean.
- 1.5 mm is stiff enough to lift without the powder sliding; go to 2 mm for a strip that gets heavy use.
- Print one strip first and check the dovetail: if it's tight, raise fit to 0.3; if it's loose, lower it.
- Set length to your bed size. A 220 mm bed fits five repeats at the default spacing.

## Selling tips

Sell a set: four strips and four corners in one motif frame a square about 53 cm across, room for a 40 cm rangoli inside. Societies, temples and event decorators buy several sets before Diwali, so list them three to four weeks ahead. A diya set and a marigold set side by side cover most orders.

## Questions about the rangoli border stencil

### How is it different from the rangoli stencil?

The rangoli stencil is a tile that builds up a pattern in the middle of the floor. This one is a strip that runs: you lay it down, sprinkle, lift it and lay it again further along, so it is made for borders, doorsteps and the edge round a bigger rangoli.

### How big is it?

50 mm wide and up to 200 mm long, with a motif every 39 mm. The strip takes as many whole repeats as fit the length you set, so set length to your printer bed (up to 225 mm). Width, repeat and thickness are in All options.

### How do the strips join?

Each strip has a dovetail on one end and a matching slot on the other. Push the dovetail of one into the slot of the next and they stay in line, with the motifs and edge dots spaced the same across the joint. Set ends to Square if you would rather just butt them up.

### How does the corner piece work?

It is an L with a flower in the corner square and the same motif down both arms, facing in. One arm ends in a slot and the other in a dovetail, so you can go round a whole square with four corners and as many strips as you need, all facing the same way.

### Will the pattern fall out?

No. Every island, like the inner band of the paisley or the heart of a flame, is held by a bridge (1.6 mm wide by default), so the stencil is one piece. Widen bridge for a stiffer stencil.

## Ideas for selling it

- [Personalised Diwali gifts to 3D print and sell](https://stlmint.app/ideas/diwali-gifts.md)

## Sellers also offer

- [Rangoli Stencil](https://stlmint.app/designs/rangoli-stencil.md): A lotus, diya, peacock, mandala or kolam pattern cut through a thin plate. Sprinkle colour powder over it, and the tiles join into a bigger rangoli. ($3 a file)
- [Festival Gift Tag](https://stlmint.app/designs/festival-gift-tag.md): A ribbon tag for corporate festival hampers with the company's mark, a greeting and each recipient's name. ($3 a file, 2 colours)
- [Coffee Stencil](https://stlmint.app/designs/coffee-stencil.md): The café's name and a mark cut through a thin disc, for dusting cocoa onto a cappuccino. ($3 a file)
