Digital 3D print fileDownloads as STL3MF
Market stall sign bracket for a pop-up canopy leg
An iron-style sign bracket for a farmers' market or craft fair tent: the upright straps to the canopy's leg, the arm reaches out over the aisle with the stall's name along it, and the sign hangs under it on S-hooks that print with it. A scroll, a sweep or a solid gusset, printed flat on its side so the arm's depth runs along the layers.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
stall-sign-bracket-Willow-Creek-Farm.stlFor any slicer and any 3D printerstall-sign-bracket-Willow-Creek-Farm.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 240 × 213 × 13 mm (24.0 × 21.3 cm) with the example text
- You type
- Stall name, Brace, Arm end, Reach, S-hooks, plus 5 more options for fine-tuning
- Colours
- 2 parts (bracket, name), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Straps to a pop-up canopy's leg, a pole or a porch post; or screws to a wall or a fence post
- The stall's name along the arm, facing the aisle
- A row of eyes under the arm, one every 20 mm, so any sign finds two to hang from
- S-hooks print with it: the sign swings in a gust instead of snapping
- An iron scroll, a plain sweep or a solid gusset over the arm, so the space under it is clear for the sign; a ball, a curl or a rounded end
- Prints flat on its side, so the layers run the length of the arm; no supports, no AMS
A sign on the tent, over the aisle
A pop-up canopy at a market has nowhere to hang a sign. A banner along the front is hidden by the people at the table, and one on the back wall is behind the stock. The bracket puts the stall's name out over the aisle, at head height, where people walking down the row see it from twenty stalls away.
How it goes together
- Upright: straps to the canopy's leg through two notches, or screws to a wall.
- Arm: reaches up to 240 mm out, with the stall's name raised along it and a row of eyes underneath. The brace sits over it, so nothing hangs in the sign's way.
- S-hooks: one curl through the arm's eye, the other through the sign's.
- Sign: the hanging stall sign has its eyes 20 mm apart in multiples, to match, and riders hang under it.
Printing tips
- It prints on its side: 12 mm thick by default, as wide as the arm is long. The Bambu 3MF uses 4 walls and 25% infill; with an STL, use at least 3 walls and 20%. PETG is better than PLA in a hot car or a sunny market.
- The name changes filament once, at the top layers. Black with gold lettering looks like wrought iron; white matches a white canopy.
Selling tips
Sell it with a hanging stall sign as a set, in the stall's colours, and offer riders on top: SOLD OUT, CARD OR CASH, and a seasonal one. Farmers' markets, craft fairs and Christmas markets are full of customers, and every one of them has a canopy.
Questions about the stall sign bracket
How does it fix to a pop-up tent?
The back of the upright sits flat against the canopy's leg, and a hook-and-loop strap or two zip ties go round the leg and through each of the two notches. The top notch, above the arm, takes the pull; the bottom one keeps it straight. A 25 mm strap fits the notch, and it works on square, hexagonal or round legs of any size.
Can I screw it to a wall?
Yes. Each notch has a countersunk screw hole through the upright, front to back, for a wall, a fence post or a porch post. Use 4 mm screws about 35 mm long.
How does the sign hang from it?
On the S-hooks that print with it: the hook's big curl goes through an eye under the arm, its small curl through the sign's eye. The eyes are 20 mm apart, and the hanging stall sign's eyes are a multiple of 20 mm apart, so any of our signs hangs straight. At the full 240 mm reach the arm takes a sign up to 200 mm wide, clear of the canopy's leg; at 200 mm, one up to 160 mm wide. Print more hooks for riders under the sign.
Is it strong enough?
For a small printed sign, yes. The bracket prints flat on its side, so the arm's depth lies in the plane of each layer and the sign's weight pulls along the layers, not across them, which is the strongest way round for a print. How much it holds still depends on your filament, walls and infill, and how far the arm reaches, so hang the sign and riders on it at home before the first market, and print it in PETG if it will sit in a hot car or the sun. In a strong wind, take the sign off; the hooks let it swing, but a canopy itself shouldn't be up in a gale.
Can I sell it?
Yes, on the Seller plan. Stall holders buy it with the hanging sign as a set, in their own colours, and it's the one piece of their stand that they can't get from a print shop.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the stall sign bracket
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.