Digital 3D print fileDownloads as STL3MF
Stethoscope name tag that snaps on to the tubing
A name tag that snaps on to the tubing of a stethoscope, so the one left on the desk at the end of a shift finds its way back: EMMA J over RN, a ward, or a student's year.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
stethoscope-id-tag-EMMA-J.stlFor any slicer and any 3D printerstethoscope-id-tag-EMMA-J.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 57 × 18 × 4 mm (5.7 × 1.8 cm) with the example text
- You type
- Name, Line under, Tube width, Heart, plus 4 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Snaps on through an open ring; nothing to thread
- A name and a line under it
- Set the tubing's width, from 7 to 14 mm
- A small heart at the end, on or off
- One per student: names in a bulk order
- One flat piece, no supports
Whose stethoscope
On a ward every stethoscope looks like every other. A tag on the tube with a name on it is the difference between getting yours back and buying another.
Printing tips
- Print flat in PETG and change filament for the name.
- Print with three walls so the ring is solid.
- If the tube won't press in, raise the width by half a millimetre.
Selling tips
Sell it as a graduation present with a heartbeat plaque, and to nursing schools by the class.
Questions about the stethoscope id tag
How does it fit the tubing?
Measure across the tube where the tag will sit and set that width. The ring is open at one side by about three quarters of the tube's width: press the tube in and the ring springs back round it.
Which filament should I use?
PETG. The ring has to flex a little each time it goes on, and PLA can crack. PETG also stands up better to being wiped.
Can it be cleaned?
Wipe it with the same wipes you use on the stethoscope and follow your workplace's infection control rules. A 3D print has fine layer lines, so take it off and clean under it as often as those rules say.
Will it damage the tubing?
It grips the outside of the tube and should not pinch it. If it is tight enough to squeeze the tube, raise the width by half a millimetre and print it again.
Can I sell these?
Yes, on the Seller plan. For a class, paste the names into a bulk order, one per line.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the stethoscope id tag
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.