Digital 3D print fileDownloads as STL3MF
Christmas stocking name tag
A name tag that slides onto a stocking's hanging loop: a mitten, a gingerbread person, a bauble, a star, a tree or a candy-cane tag, with the name across the middle.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
stocking-name-tag-Emma.stlFor any slicer and any 3D printerstocking-name-tag-Emma.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 56 × 89 × 3 mm (5.6 × 8.9 cm) with the example text
- You type
- Name, Shape, How it hangs, plus 9 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- Six shapes: a knitted mitten, a gingerbread person, a bauble, a chubby star, a little tree and a tag in candy-cane stripes
- A slide-on hook slips over the stocking's loop without untying anything, or a ribbon slot or a round hole
- The name sits across the middle in a friendly script and shrinks to fit a long one
- Small details: a stitched line inside the edge, snow dots, icing on the gingerbread, a ribbed cuff on the mitten
- One name per line in a bulk order makes a set for the whole family
- Prints flat in two colours with no supports
Whose stocking is whose
On Christmas Eve the stockings go up in a row, and on Christmas morning everyone wants to know which one is theirs. A name tag on the loop settles it, and it comes out with the decorations every year after that.
Pick a shape for the whole family or a different one each: a knitted mitten with a ribbed cuff, a gingerbread person with an iced face and buttons, a bauble with a ridged cap and wavy bands, a chubby star, a little tree hung with baubles and a star on top, or a gift tag wrapped in candy-cane stripes with a small candy cane over the name. The name runs across the middle, and a dashed stitched line just inside the edge makes it look sewn on. Snow dots can be turned off for a plainer tag.
The slide-on hook at the top means nobody has to unpick the stocking's loop: it slips in through a narrow cut at the side and sits in the slot, with the cut below where the loop pulls. For a stocking without a loop, use the ribbon slot or the round hole instead.
Printing tips
- Classic colour pairs: white on red, white on green, gold on dark green, or red on white for the candy-cane tag.
- Print it at 2.6 mm in PLA or PETG: thick enough that the hook doesn't bend, thin enough to hang flat.
- Pacifico and Lobster suit the shapes best. Outfit Bold reads from further away for short names like Dad or Mom.
- A whole family fits on one plate. Put the filament change at the top of the base and every tag gets its name in the second colour.
Selling tips
Sell them as a family set: one tag per name in one shape, or a mixed set so the children can each pick. Add one for the dog or the cat. Christmas markets and online shops sell out from late November, so open orders early and ask for every name in one go.
Questions about the christmas stocking name tag
How does it go on the stocking?
Most stockings hang from a fabric loop sewn into the cuff. The slide-on hook has a narrow cut running down and out from one end of its slot: fold the loop flat, feed it up through the cut and it sits in the slot. Hanging, the loop pulls up against the top of the slot, away from the cut, so the tag stays on, and it comes off the same way. If the stocking has no loop, choose the ribbon slot or the round hole and tie it on.
How big is it?
80 mm tall without the hanger and 2.6 mm thick. The candy-cane tag is 60 mm wide, the star the widest at about 84 mm. Size goes from 55 to 120 mm in All options.
What if the loop is wide?
Set loop_width to the width of the loop or ribbon. The slot is cut 2 mm wider, and the hanger grows with it.
Can a long name fit?
Yes, the name gets smaller to fit its space. Names up to about ten letters read well at 80 mm. For longer ones, pick the gingerbread person, whose name runs across both arms, or make the tag bigger.
How do I make a set for the family?
On the Seller plan, paste the names one per line into a bulk order. You get a ZIP with one file per name, all in the same shape.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the christmas stocking name tag
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.