Digital 3D print fileDownloads as STL3MF
Stripe NFC business card
Contact lines on one side and a colour stripe down the other, holding the NFC tag. Tap the stripe to open the link.
- Clad 2 colours, 1 filament swap across 2 platesColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- Mint Set 2 pieces on 2 platesPrints as pieces that slot or press together; the studio shows it assembled.
What you download
stripe-nfc-business-card-Tom-Becker.stlFor any slicer and any 3D printerstripe-nfc-business-card-Tom-Becker.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 86 × 54 × 3 mm (8.6 × 5.4 cm) with the example text
- You type
- Company or name, Slogan, Name, Phone, Email or website, Logo, plus 32 more options for fine-tuning
- Colours
- 2 parts (accent, card), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- The stripe shows where to tap
- An icon or initials in a circle as the logo
- Bank card size: a 2 mm card with the colour raised 0.6 mm on top; US and European sizes too
- Two colours, flush or raised; prints flat with no supports
Tap the stripe
A colour stripe runs down the right side of the card with the NFC tag in the middle of it, ringed in the card colour. The name, logo and contact lines sit beside it. The stripe is where the customer taps, so the card needs no instructions.
Selling tips
- Print the stripe in the customer's brand colour and the card in white or black.
- Offer the stripe with dots or lines fading out of it for a bit more pattern.
Questions about the stripe nfc business card
Which NFC tag do I need?
A round NFC sticker, 25 mm across (NTAG213 or NTAG215, sold in packs online). Other sizes from 15 to 40 mm are under Tag diameter in All options. Write the link with a free app such as NFC Tools; it reads through the plastic, so you can write it before or after it goes in.
How do I print it?
Flat, face up, with no supports. The raised finish, the default, stands the colour on top of the card with the letters on it cut through to the card below, so one filament change does it: no AMS needed. The lid prints on a plate of its own: drop the tag in the pocket and press the lid in on top. If it is tight, raise the lid clearance in All options; if it is loose, add a drop of glue. The flush finish under Print keeps both colours in one smooth face, but needs an AMS or another multi-material printer.
Can I sell cards made from this file?
Yes, on the Seller plan you can print and sell as many as you like through any channel.
Sellers also offer
Start selling the stripe nfc business card
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.