# Stripe NFC business card

> Contact lines on one side and a colour stripe down the other, holding the NFC tag. Tap the stripe to open the link.

Web page: https://stlmint.app/designs/stripe-nfc-business-card

Personalise it in the studio: https://stlmint.app/app?p=stripe-nfc-business-card

## Details

- Category: [NFC business cards](https://stlmint.app/designs/business-cards.md)
- Price: $4 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 86 × 54 × 3 mm (8.6 × 5.4 cm) with the example text
- You type: Company or name, Slogan, Name, Phone, Email or website, Logo, plus 32 more options for fine-tuning
- Colours: 2 parts (accent, card), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap across 2 plates): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. Mint Set (2 pieces on 2 plates): Prints as pieces that slot or press together; the studio shows it assembled.

## Why sellers like it

- The stripe shows where to tap
- An icon or initials in a circle as the logo
- Bank card size: a 2 mm card with the colour raised 0.6 mm on top; US and European sizes too
- Two colours, flush or raised; prints flat with no supports

## Good for

- Trades
- Workshops
- Consultants
- Market sellers

## Tap the stripe

A colour stripe runs down the right side of the card with the NFC tag in the middle of it, ringed in the card colour. The name, logo and contact lines sit beside it. The stripe is where the customer taps, so the card needs no instructions.

## Selling tips

- Print the stripe in the customer's brand colour and the card in white or black.
- Offer the stripe with dots or lines fading out of it for a bit more pattern.

## Questions about the stripe nfc business card

### Which NFC tag do I need?

A round NFC sticker, 25 mm across (NTAG213 or NTAG215, sold in packs online). Other sizes from 15 to 40 mm are under Tag diameter in All options. Write the link with a free app such as NFC Tools; it reads through the plastic, so you can write it before or after it goes in.

### How do I print it?

Flat, face up, with no supports. The raised finish, the default, stands the colour on top of the card with the letters on it cut through to the card below, so one filament change does it: no AMS needed. The lid prints on a plate of its own: drop the tag in the pocket and press the lid in on top. If it is tight, raise the lid clearance in All options; if it is loose, add a drop of glue. The flush finish under Print keeps both colours in one smooth face, but needs an AMS or another multi-material printer.

### Can I sell cards made from this file?

Yes, on the Seller plan you can print and sell as many as you like through any channel.

## Sellers also offer

- [NFC Business Card](https://stlmint.app/designs/nfc-business-card.md): A colour band with a logo up top, contact lines below, and a pocket for an NFC tag. ($4 a file, 2 colours)
- [Signal Ring NFC Business Card](https://stlmint.app/designs/signal-nfc-business-card.md): Rings spread out from the NFC tag like a signal, with the details beside them. ($4 a file, 2 colours)
- [Framed NFC Business Card](https://stlmint.app/designs/framed-nfc-business-card.md): A plain card with a fine frame, and the NFC tag sealed inside. ($4 a file, 2 colours)
