# Sweeping 3D name plate

> Tall letters stand upright at the front and sweep back in a quarter circle until they lie flat on the base, so every letter trails its own curved wake. One or two lines, each in its own font.

Web page: https://stlmint.app/designs/sweeping-name-plate

Personalise it in the studio: https://stlmint.app/app?p=sweeping-name-plate

## Details

- Category: [Signs and name plates](https://stlmint.app/designs/signs.md)
- Price: $4 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 188 × 78 × 53 mm (18.8 × 7.8 cm) with the example text
- You type: Back line, Front line, plus 14 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, one per plate): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. Mint Set (18 pieces on 2 plates): Prints as pieces that slot or press together; the studio shows it assembled.

## Why sellers like it

- Each letter sweeps back in a quarter circle, as far as it stands tall
- One or two lines, each with its own font and size
- The back line stands on a step so it shows above the front line
- Base follows the letters, or a rounded plate
- Two colours: base and letters

## Good for

- Desks and shelves
- Kids' rooms
- Gamer setups
- Family names
- Shop counters

## A name plate that looks like it is moving

Each letter is turned a quarter turn about its foot: upright at the front, flat on the base at the back, with every position in between left behind as a curved wake. From the front it reads as a plain name; from any angle the sweep is what people notice.

## Printing tips

- Print the base and the letters on plates of their own, one colour each, then press each letter's foot into its pocket. A dark base with bright letters shows the curves best.
- With an AMS, pick the AMS version in the studio and it prints in one piece, nothing to assemble.
- A condensed bold face (Big Shoulders, Saira Condensed, Teko) gives thin, tall sweeps like the photos.

## Selling tips

Offer it for desks, kids' rooms and gaming setups, with the name on the front line and a word like "TEAM", "THE" or "PLAYER" on the back.

## Questions about the sweeping name plate

### Can I have just one line?

Yes. Clear the front line and the back line stands on its own, with no step under it.

### What about lower case letters with tails, like g and y?

Capitals look best and are the default. In lower case, a line with tails turns about the bottom of its tails, so its other letters stand slightly off the base.

### How is it printed?

In two colours, each on a plate of its own, so no AMS and no filament change is needed. The base prints flat and the letters stand on their feet; each foot presses into a matching pocket in the base, so every letter only fits its own place. With an AMS, pick the AMS version in the studio and it prints in one piece, base down. Where part of a letter does not reach the base (the arms of a T or a Y), its underside curves up into a short overhang at the front. Most printers manage it; if one droops, add supports from the build plate.

### How big is it?

It follows the text. Each letter sweeps back as far as it is tall, and a line longer than the longest length you set gets smaller letters.

## Sellers also offer

- [Wedge Name Plate](https://stlmint.app/designs/wedge-name-plate.md): The classic office desk plate, with a name and a job title on the sloping front. ($4 a file, 2 colours)
- [Desk Name Plate](https://stlmint.app/designs/desk-name-plate.md): The name across the front of a desk organiser with a pen cup, tray and card slot. ($5 a file, 2 colours)
- [Neon Name Keychain](https://stlmint.app/designs/neon-name.md): A name drawn in a glowing outline, like a little neon sign. ($3 a file, 2 colours)
