# Wedding table number stake for centrepieces

> A table number on a stiff stake that pushes into the flowers, the florist's foam or a potted plant, in an arch, a leaf wreath, a hexagon or a scooped card, with the couple's initials underneath.

Web page: https://stlmint.app/designs/table-number-stake

Personalise it in the studio: https://stlmint.app/app?p=table-number-stake

## Details

- Category: [Wedding and event details](https://stlmint.app/designs/event-details.md)
- Price: $4 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 80 × 220 × 4 mm (8.0 × 22.0 cm) with the example text
- You type: Table number or name, Couple's initials, Frame, plus 15 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 1 filament swap): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. One Strike (one piece): Comes off the plate ready to use, with nothing to put together.

## Why sellers like it

- Four frames: a tall arch, a round leaf wreath, a hexagon and a card with scooped corners, each with a fine double line
- The number in a big script or a tall bold face, or a table name such as Jasmine or Family
- The couple's initials at the bottom over a small diamond, heart or leaf sprig
- A wide stake with a raised spine and a point, so it goes into foam or soil without bending
- 80 mm wide and about 220 mm tall with the stake; the stake length is adjustable
- On the Seller plan, one table per line in a bulk order makes the whole set, 1 to 50

## Good for

- Wedding receptions
- Engagement dinners
- Anniversary parties
- Corporate dinners
- Florists

## A number that stands up out of the flowers

A table number in the centrepiece is easier to spot from the door than one lying flat on the cloth, and it doesn't crowd the plates. This one is a card on a long stake. The florist pushes it into the foam, or the planner pushes it into a potted plant or a jar of moss, and it stands just above the flowers.

The card comes in four frames. The **arch** is a tall window with a round top. The **wreath** is a circle with two leafy branches climbing its sides. The **hexagon** suits a modern table, and the **rounded card** has the scooped inner corners of a printed invitation. Each has a fine double line inside its edge. The number sits in the middle with a small TABLE over it, and the couple's initials sit at the bottom over a little diamond, heart or leaf sprig.

The stake is wide and has a raised spine down its face, so it goes into firm foam without bending, and it ends in a point.

## Printing tips

- Print face up, flat on the bed, with no supports. The whole stake fits diagonally on a 220 mm bed.
- Change filament at the top of the card (3 mm) for the lettering colour; the spine down the stake comes out in it too. That is the only change, so no AMS is needed.
- Use PETG for arrangements that stay in wet foam; PLA for dry ones.
- Dancing Script, Lobster and Pacifico give a script number; Big Shoulders and Saira Condensed give a tall bold one that reads from further away.

## Selling tips

Sell the table numbers as a set with the [place card holders](/designs/place-card-holder) and the [seating chart pegs](/designs/seating-chart-pegs), all in the same colours. Florists and decorators are good customers too: they build centrepieces for many weddings and reuse a stock of numbered stakes, so offer them a plain set of 1 to 30 without initials.

## Questions about the table number stake

### What does the stake go into?

Florist's foam, the soil of a potted plant, sand or moss in a jar, or between the stems of a tight bouquet in a vase. Push in most of the stake so the card stands just above the flowers. For a vase of loose stems, wedge it against the side so it does not turn.

### Will it bend or snap?

The stake is 7 mm wide and 3 mm thick with a raised spine down its face, and the corners where it meets the card are filled in, so it stays straight in foam and soil. Print it in PETG if it will sit in wet foam all day; PLA is fine for dry arrangements.

### Can I use table names instead of numbers?

Yes. Type the name in the number box and leave the small TABLE line empty. Names shrink to fit the frame, so a short name like Jasmine or Family prints biggest. For long names, widen the card in All options.

### How do I make a full set of table numbers?

On the Seller plan, paste the numbers one per line into a bulk order, 1 to 30 or however many tables there are. You get a ZIP with one file per table, all in the same frame and colours.

### Which colours look best?

Ivory, white or blush for the card with gold, champagne or black lettering. Change filament at the top of the card for the lettering, frame lines, wreath and the spine down the stake.

## Ideas for selling it

- [Personalised wedding favours to 3D print and sell](https://stlmint.app/ideas/wedding-favours.md)

## Sellers also offer

- [Table Number Tent](https://stlmint.app/designs/table-number-tent.md): A big table number and a code, on two plates that lean together so it reads from both sides. ($4 a file, 2 colours)
- [Place Card Holder](https://stlmint.app/designs/place-card-holder.md): A heart, leaf sprig, hexagon or lotus foot that holds a paper place card in a gripping wave slot, with the couple's initials and the date. Guests take it home. ($3 a file, 2 colours)
- [Seating Chart Pegs](https://stlmint.app/designs/seating-chart-pegs.md): A table's guest name tags that clip onto the twine of a string seating board with two hooked slits, with a header tag for the table, all on one plate. ($4 a file, 2 colours)
