Digital 3D print fileDownloads as STL3MF
Tealight base with the family name
A flat lotus, rangoli, diya or star base that a tealight sits in, with the family name round the light and Shubh Deepavali underneath.
- Clad 2 colours, 1 filament swapColours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed.
- One Strike One pieceComes off the plate ready to use, with nothing to put together.
What you download
tealight-name-base-THE-JOHNSONS.stlFor any slicer and any 3D printertealight-name-base-THE-JOHNSONS.3mfA Bambu Studio project with the colours set
Digital files only. Nothing is posted: you print it yourself, for you or for your customers.
Single files and the Party pass and Season pass are for personal use and gifts. To sell prints you need an active Seller plan or Seller year pass; prints made while it is active stay yours to sell after it ends. The digital files themselves may never be shared or sold. Read the licence
- Size
- About 110 × 110 × 5 mm (11.0 × 11.0 cm) with the example text
- You type
- Family name, Greeting, Shape, plus 10 more options for fine-tuning
- Colours
- 2 parts (base, text), so it prints in 2 colours or as one
- Files
- STL for any slicer, plus a two-colour Bambu Studio project
Why sellers like it
- A shallow pocket holds a standard 38-39 mm tealight cup, or a bigger one if you change the size
- Lotus, scalloped rangoli plate, diya with a flame in its spout, or a star of long and short points
- The family name curves round the top of the light and the greeting round the bottom, or the name sits straight on a plaque at the front
- Names and greetings in Devanagari work too, such as शर्मा परिवार and शुभ दीपावली
- All the plastic stays below the rim of the tealight cup, away from the flame
- Prints flat in two colours with no supports
A light for every family
At a society or office Diwali party, a small gift with each family's name on it means more than another box of sweets. This base holds one tealight in a shallow pocket in the middle, with the family's name curving round the light and Shubh Deepavali round the bottom. Put one on every doorstep, give one to each family as a return gift, or set them out on the tables with a name at each place.
Choose a lotus with eight petals, a round rangoli plate with a scalloped edge, a diya with a flame in its spout, or a star. The plaque layout puts the name straight across a plaque at the front, which suits longer names and script fonts, and the greeting moves round the top of the light. Change the greeting for weddings, Eid, Christmas or a housewarming.
Two small notches beside the cup let you lift it out with a fingernail when it's finished.
Safety
The flame stays inside the tealight's metal cup, which sits in a 3 mm deep pocket. Nothing else on the base comes up higher than the cup's rim, so no plastic is close to the flame. LED tealights are the safest choice and look the same at night. If you use real tealights, print in PETG, put the base on a heatproof surface, and never leave it burning on its own.
Printing tips
- Print the base in a deep colour (maroon, deep blue, green) and the lettering in gold or cream.
- PETG takes the warmth of a burning tealight much better than PLA. With PLA, stick to LED tealights.
- Change filament at the top of the base: everything above that height is the lettering and pattern.
- Print one, drop in a tealight to check the fit, then print the batch.
Selling tips
Sell sets to housing societies, offices and puja committees, one base per family, with a pack of LED tealights included. Offer the Hindi greeting alongside the English one, and a matching festival gift tag for the boxes.
Questions about the tealight name base
Is it safe with a real tealight?
The flame burns inside the tealight's own metal cup, and every part of the base stays below the rim of that cup, so nothing plastic is near the flame. The base is still plastic, though: never leave a lit tealight unattended, keep it away from curtains and children, and use LED tealights wherever you can. For real flames, print it in PETG, which takes heat better than PLA.
Which tealights fit?
The pocket is 40 mm across, which fits standard tealights (38-39 mm cups) and most LED tealights. Measure yours and change cup_diameter in All options for bigger maxi tealights or a snug fit.
How big is it?
110 mm across and about 5.5 mm tall with the lettering. The diya is 78 mm wide and 110 mm long. The plaque layout adds a name plaque at the front, about 25 mm tall, which widens up to the full width of the base for a long name. Size is in All options; the base grows by itself if a long name needs more room.
How do I make one for every family?
On the Seller plan, paste the family names one per line into a bulk order. You get a ZIP with one file per family, all with the same shape and greeting.
Can I print it without a floor under the cup?
Yes: set floor_thickness to 0 and the pocket goes right through, so the cup stands on the table or a tile and nothing plastic sits under it.
Ideas for selling it
More in personalised print ideas by occasion. Pricing an order? Try the profit calculator and the other free maker tools.
Sellers also offer
Start selling the tealight name base
Type your customer's text, send them the picture, download the print file.
Early Black Fridaythrough Nov 30 (US Pacific time)
The Seller plan at $12 $6 a month
For your first 3 months, then $12. Every design, bulk lists, and the right to sell your prints. Comes off at checkout, no code needed.