# Toy car garage wall that grows, with a name

> Garage bays for 1:64 die-cast cars with dovetails on all four sides. Slide block onto block, sideways or upwards, and a few prints become a wall of cars under a sign with a name.

Web page: https://stlmint.app/designs/toy-car-garage-wall

Personalise it in the studio: https://stlmint.app/app?p=toy-car-garage-wall

## Details

- Category: [Toys and activities](https://stlmint.app/designs/toys-and-activities.md)
- Price: $4 for a single file, or included in every pass and plan (Party pass $8 for 7 days, Season pass $20 for 90 days, Seller plan $12 per month, Seller year pass $99 for a year; see [pricing](https://stlmint.app/pricing.md))
- Size: About 182 × 136 × 38 mm (18.2 × 13.6 cm) with the example text
- You type: Name, Bays across, Bays high, Bay height, Lettering, plus 7 more options for fine-tuning
- Colours: 2 parts (base, text), so it prints in 2 colours or as one
- Files: STL for any slicer, plus a two-colour Bambu Studio project
- Printing: Clad (2 colours, 2 filament swaps across 2 plates): Colours stacked in layers, like a clad coin: pause and swap filament where each colour starts. No AMS needed. Mint Set (2 pieces on 2 plates): Prints as pieces that slot or press together; the studio shows it assembled.

## Why sellers like it

- Dovetails on all four sides: the next block slides on beside, above or below
- One or two bays across and one to four high in a block, up to eight cars a print
- Bays share thin walls inside a block, so a wall uses less plastic than single boxes
- Bay length, height and depth are settings: 86 x 32 mm fits the long cars, 44 mm high takes vans and trucks
- The fit of the dovetails is a setting, for printers that print tight
- A name sign slides onto the top and stops flush with the front
- Prints on its back with no supports; the front edge prints in a second colour

## Good for

- Children's rooms
- Collectors' walls
- Playrooms
- Birthday gifts
- Print sellers

## A wall that grows with the collection

Toy cars arrive one at a time and never stop. This is a garage that keeps up: a block of bays with dovetails on all four sides, so the next block slides on beside it, above it or below it. Print six bays now and eight more next month.

Each car parks side-on in its own bay, where you see all of it and it can't roll away.

## What you can set

- **The block**: one or two bays across, one to four high.
- **The bays**: 76 to 100 mm long, 28 to 50 mm high, 32 to 46 mm deep. Keep the length the same across a wall so the blocks line up.
- **The sign**: a name along the top, or none on the blocks that extend a wall.
- **The fit** of the dovetails, from 0.05 to 0.4 mm.

## Printing tips

- Print a single bay first and slide two together to settle the fit.
- The block prints on its back; change filament for the last 1.2 mm to give the front edge its colour, or leave it one colour.
- The sign's sockets are closed at the front, so it slides on until it is flush and stops.

## Selling tips

Sell the first block with the name sign, then plain blocks to extend it. For cars kept in their packets there is the [carded car peg rail](/designs/carded-car-peg-rail), and for a desk the [toy car park](/designs/toy-car-park-levels).

## Questions about the toy car garage wall

### Which cars fit?

1:64 die-cast cars: Hot Wheels, Matchbox, Majorette and the like. A standard car is about 70 to 76 mm long, 30 mm wide and 25 mm high, and the longest are about 86 mm, which is the default bay. For vans, trucks and the tall ones set the bay height to 40 mm or more. Monster trucks are bigger than any of these settings.

### How do the blocks join?

Every block has dovetails along its top and right side and matching sockets along its bottom and left side, running the full depth. Slide the next block on from the front. Blocks of the same bay length join above and below; blocks of the same bay height join side by side.

### The blocks won't slide together. What now?

Raise the fit setting. It is the clearance in the dovetails: 0.15 mm suits a well-tuned printer, 0.25 to 0.3 mm one that prints a little fat. Print a single bay first to try it; that takes little plastic.

### How does it go on the wall?

Each block has two screw holes through the back of its bays, countersunk, hidden behind the cars. On a wall, screw every second or third block and let the dovetails carry the rest. It also stands on a shelf or a desk with no fixing at all.

### Do the cars roll out?

No. A car parks side-on, so it can only roll along the bay, and the bay's walls are at both ends.

### How does it print?

On its back with the bays opening upwards, no supports. The last 1.2 mm, the front edge, prints in the second colour with one filament change. The sign prints flat, face up, on its own plate.

### Can I sell it?

Yes, on the Seller plan. Sell a starter block with the child's name on the sign, and plain blocks as add-ons: buyers come back for more as the collection grows.

## Ideas for selling it

- [Children's room and learning gifts to 3D print and sell](https://stlmint.app/ideas/kids-rooms-and-learning.md)

## Sellers also offer

- [Toy Car Park Levels](https://stlmint.app/designs/toy-car-park-levels.md): A multi-storey car park for 1:64 die-cast cars: decks with numbered bays that stack on press-in posts, level on level, under a sign with a name. ($4 a file, 3 colours)
- [Starting Grid Car Plinth](https://stlmint.app/designs/starting-grid-car-plinth.md): A plinth for one die-cast car in a painted grid box, with a grid position, the car's name and a second line. Plinths join side to side into a starting grid. ($4 a file, 2 colours)
- [Carded Car Peg Rail](https://stlmint.app/designs/carded-car-peg-rail.md): A wall rail for die-cast cars still in their packets: each card hangs on a flat peg under a title, and rail joins rail along the wall. ($4 a file, 2 colours)
